As far as I can tell, yes.
I've yet to do it though, its a project for next year :)
As far as I can tell, yes.
I've yet to do it though, its a project for next year :)
I've heard that the IPD HD ones are just XC ones anyway, dunno if it is true though.
I'm pretty certain the only ones you can get from Volvo are the XC90 ones now
I have them on mine, can't tell you what difference they made though!
I'm sure you can tell the computer what injectors to are running, might reckons I'm getting 18, which seems about right going on the mileage I clock between fuel stops.
You will only get a tug if you front windows are heavily tinted, the rest don't matter, you can paint them out solid, think about a van, they don't often have extra windows.
Shame about the...
Seen this car on eBay, always a great looking example :)
As I have put in Ade's thread, this might help you
https://www.gov.uk/government/publications/v888-request-by-an-individual-for-information-about-a-vehicle
This might help you in tracing the history
https://www.gov.uk/government/publications/v888-request-by-an-individual-for-information-about-a-vehicle
Most oils on the shelves today are "Multigrades", which simply means that the oil falls into 2 viscosity grades (i.e. 10w-40 etc)
Multigrades were first developed some 50 years ago to avoid the old...
It didn't work in my car, but, it 'apparently' worked in the car of the person I bought it off.
Small update, the Mistress has done 450miles now, apart from a few teething problems, been going well, boosts to 0.8, this is because it has no boost controller on at the moment, the compressor is...
Look the same as what is on mine, they are S60R
http://m44.wikia.com/wiki/Special:NewFiles?file=Ecuconnectorschamtic.jpg
This any good to you?
Once I've fixed its latest issue, the brake lights! I will probably be taking it back to my unit where the seats will be removed, you are more than welcome to them, but, I have alot going on at the...
Briefly,
Forged rods
81.5mm forged pistons
Piper fast road cams
Ported heads, with new valves and guides
New bearings, seals and main engine bolts
Garrett GT3071R turbo on ME7 exhaust...
I have a Tim throttle body on mine, can't be that switch like, copes with traffic ok
Looks great with both bumpers done :)
Not true, the Innovate kit I have has a simulated narrow band output, so you can run just one sensor.
The two sensors produce different output voltages, narrow band is 0-1 volt, wideband is 0-5...
Nice one, tidy looking car too :)
Yeah, come on!
I mean, even I have managed to get the mistress MOT'd!
Todays BIG update!
It has passed its MOT!!!!! :bow_kneel
(And I have made 4,000 posts! :) )
Very nice!
325mm drilled discs with AP Racing 4 pots on the front and 330mm S60R discs and Brembo 4 pots on the rear (in gay gold)
Forgot to add, has braided hoses throughout, and AP Racing 5.1 brake fluid
I have the same Innovate kits, works well, once you connect the gauge to the wideband output, and not the narrowband! lol
I got rid of my TT in the end!
Fairly certain mine is now MTE