volvo 240 gl v8 project

[jimperry]

Thanks for that Claymore
Have been busy lately and have not had time to do much a quick update
the main problem i had was a gear box ratio fault due to the diff ratio the jag was a 3.06 and the volvo i believe is a 4.27
the internal speedo pickup on the diff is 48 tooth same as the jag abs rings due to axle ratio the difference is to much and the gear box ecu assumes there is clutch slipping internally and fail safe is set, so i figured 48 divided by 3 roughly 16 teeth on prop should do it, set about the diff flange with a file and grinder added a 850 rear abs sensor on a small bracket it seems happy and gearbox works ok think i will have to find a 3.6 diff or there abouts at a later date ,also added a small fuel secondary tank to house the twin jag pumps