Eta and engine management light

[ncarnall]

Mine did that, turned out to be the sensor on the brake servo terminals had come adrift from circuit board. Re-soldered and reset lights with code reader and all has been fine since

[jdavis]

Mine did that, turned out to be the sensor on the brake servo terminals had come adrift from circuit board. Re-soldered and reset lights with code reader and all has been fine since

Thanks for that.
I've tried it on a cheap code reader, got codes P0332 Knock sensor 2 and P0102 Mass air sensor cicuit low.
reset them but the lights came straight back on. just seems strange with it being ETS light and Engine Management. Also noticed my fan's kicking in after i turn it off after every journey now the lights are on. strange.