Done :D
Done :D
Doh Paul beat me to it but anyhow...
The best, tried, tested and reputable system to go for is made by BRC although it comes at a price of around £1600.
Both Nealevo and Pault5estate have the...
Just over 5psi mate.
Bcs and tcv are different terms for the same thing. Just grab a t5 tcv from a P1 and you'll be fine.
I can spare a couple of hours on Saturday, if that's any good?
I have pmed Sponge and asked if he would be making another batch and if so i would sort out all the vpc side and pay him in one job lot to keep it simple for him, will let you know when i get a...
Tim Williams can also get the rods.
There was a comparison thread on VS covering the chinese made rods (including the Max Speeding rods)...
Paul asked me to pop up to his unit to plug my laptop into the ecu, I got there and started the car up, the car ticked over fine so I took it up and down the yard a couple of times, all seemed fine...
pmsl!! ok forget I mentioned dubs !!
just noticed i missed some so re edited them
be nice to me i'm a computer numpty
It's an RGA one (Or something like that), I am going to be making something similar in the new year but it will more resemble the R lip. Liking the Rear spoiler too, I will still have to have a go at...
here are pics with black lip........it is only electrical tape so can be altered
http://i1137.photobucket.com/albums/n513/850t5steve/PICT0208.jpg...
Let's not even go there and out of the 4 of us no-one has a runner :)
Yes mate, part number is 01502034
Regarding the £500 quote I fully agree and as many people know a car at that price will need a hell off a lot of work to run big power as the parts have had so much wear and tear ask any one who has...
estates were used 1994
You read all about it did search and came up with this pdf file...
My 850 AWD has a DMF, but then it also has the M4.4 ecu and was one of the last 850s made
M14x1.5mm thread on the block. Buy a M14x1.5 to 6an or 4an adaptor that way you can just fit up a braided water line straight to it.
Really looking forward to seeing your car once its finished. Cant be far off now eh paul?
Should be a good few motors to see with very different specs soon, be interesting to see which tracks and...
can i ask why people are sticking to volvo specific tuners, i'm going to be using a dastek ecu, and getting it all mapped at my local tuner.
Better than porn that mate, looks lovely, forged as well.:biggrin:
The AP kit should fit with Tethy's as the calipers are about 10mm narrower than the WP ones, I run the AP kit but if doing it again I would use S60R discs and Porsche calipers because of the larger...
I had the WP Pro Kit, and was running Tethy's at the time. I had to run 5mm spacers though. I suspect AP's would be the same or similar.
One thing to consider is the cost of replacement discs...
it does exactly the same thing as a dump valve. When you back off the throttle ie to change gear the turbo still continues to spin because of how well there balanced, the recirc valve opens & lets...
Thanks Fandango - I have seen it and in fact I was the one that photographed it before I even know who's it was. His is what got me started on this and made my buy a white estate t5! However, as he...