Update time, where has the year gone already....
VT600 has been and gone, luckily I didn't take olive as it tbh, as it turned out to be a real shambles imho (ok on the upside, it did make a load...
Update time, where has the year gone already....
VT600 has been and gone, luckily I didn't take olive as it tbh, as it turned out to be a real shambles imho (ok on the upside, it did make a load...
Saved from our amazon, we will try and fit it so it looks factory and as is.
http://i1068.photobucket.com/albums/u452/pauldriver/bulk%20ed%20004_1.jpg
...
More for ya...
http://i1068.photobucket.com/albums/u452/pauldriver/amazon%20021_1.jpg
http://i1068.photobucket.com/albums/u452/pauldriver/amazon%20022_1.jpg
Drilled ready....
Slightly late (apologies, man flu) but on behalf of the team we would like to wish all the members a very merry Christmas.
Not to turn this into the Queens speech, I hope you are all with loved...
1.13.2)117mph Tim Williams 850 T5
2.13.2@111mph - Spesh
3)13.3@110 mph woody t5 set at 1.3bar york avon york avon
4)13.3@100.17mph - santa20, lightly modded s60r
5)13.49@104.3mph- Mole T-5R 855...
13.2 @ 117MPH at Shakespeare today, thank you for having me again.
I finally got to have a go, my other attempt to get there last month ended in a failed diff and gearbox before I even go to Shakespeare. It was nice to meet up again inc the homeless man...
Well in the post on the same day as the last update were the new temperature gauges, 1 in blue for the intake and 1 in red for the throttle body, I also picked up a new rear exhaust bracket and a...
Well time flies and I've not done the update I promised so here we go, The new gauging equipment was installed ready for when she returned to the road and spring rate in the actuator taken back 2...
and not forgetting Martin and Mr Sideways's PB's in the 244 and 855tdi respectively.
1)13.2@111mph - Spesh
2)13.3@110 mph woody t5 set at 1.3bar york avon york avon
3)13.3@100.17mph - santa20,...
1)13.2@111mph - Spesh
2)13.3@110 mph woody t5 set at 1.3bar york avon york avon
3)13.3@100.17mph - santa20, lightly modded s60r
4)13.75@100.9mph - 7mgtesup, 940 turbo slightly quicker than...
Do yourself a big favour and buy yourself a Mityvac before you go wasting anymore time or money.
Chances are you do have a boost leak, maybe a hose has been disturbed when fitting your new gauge or...
Try this:
https://www.youtube.com/watch?v=lI4kK33lhRw
It was just a case of fitting a tracs ABS unit and a tracs switch and it was plug and play :)
There's something you don't see everyday..........
https://youtu.be/kPwWqzLNjNc
Finished the...
http://i595.photobucket.com/albums/tt39/t5pete/20170619_220930_zpset1ohcqx.jpg
http://i595.photobucket.com/albums/tt39/t5pete/IMG_0250_zpsbdd3lqbq.jpg...
Finally had chance to give the s60r a good clean also got the boost gauge up and working.
http://i595.photobucket.com/albums/tt39/t5pete/20170528_173312_zpsmkexkigl.jpg...
Well, after the rover 75 failing it's MOT spectacularly, it was the only excuse I needed to junk it and replace it with a Ford.
...
Phew !!! it's not the angle gear....well that's the verdict from Volvo, codes all read and reset and the bill sir.........F.O.C. .....what nice people and excellent service, I will probably see them...
Nope... just a home tuner getting to big for his boots. ..Nothing else..just my own stupidity. ...and I except that but it took 9 years of playing to bend a rod so I ain't that nieve. ..just getting...
Well took the plunge a few weeks back and bought an XC90 D5 auto, must say what a lovely car to drive, gets along nicely and is comfy as anything, sound system is amazing and all the toys you could...
Had fun playing musical gearboxes. I took the internals out of a M66D and put them in the XC casing to make a M66E awd gearbox, just need the s60r diff to finish it off.
31454
31455
31456
...
A bit of ducting for the air box and a shiny new alloy radiator :)
http://i170.photobucket.com/albums/u258/claymore2k/T-5R/20170322_160956.jpg
...
The owners dog has pissed up your car mate
Just a little update on my car it's looking good hopefully should be picking it up on Friday if all goes well? Then onto the next stage [emoji1] [emoji1]
...
Got the internal reinforcing plate welded in for the torque tube fixing point. Also found £7.42 between the sound proofing and the floor plan under the drivers seat. Looks like it's been there a few...