Exhaust clamp ?

Posts

Post 564735 by v70tom on 2013-01-21 17:28:23

Hi people, Ok I finally got around to to figure out the bloody volvo v70 exhaust is holding up by a bloody clamp which seals the cat pipe and box pipe together, Now I trying to get a clamp. No problem but they all 60mm. I need a 50mm clamp, and seems only f.... Volvo dealers can order them for a silly amount of penny's. Also they order I pay and 4 days later I can pick it up. Would anyone know of a dealer I can mail order one of those ( 50mm ) and not paying for a new car ? Volvo wants 15£ for each half means £30 for a exhaust clamp. Silly price for something which rust away in 1 or 2 years again. eBay prices around 5 - 10 but I don't get any answers which size they are and don't want to end up with the wrong one. I got already a 60 mm and is useless. Anyone can recommend somebody to get one for cheap?

Post 564992 by partsforvolvos.com on 2013-01-22 13:23:33

hi tom i think you might need pfv907630 if it is a up to 2000 v70 but these are normally only used on non turbo cars- they are 55mm and i havent heard of 50mm - our 'turbo' one is larger than this http://www.partsforvolvosonline.com/product_info.php?cPath=104_668&products_id=7359 hope it helps jamie

Post 565024 by v70tom on 2013-01-22 16:32:04

Tanks Jamie. I went to volvo again today and they said the early v70 was indeed a 50mm exhaust but replaced in 2000 for a 55mm and again with the phase. 2 models to 60 mm.this was taking 3 guys a computer and 30minutes for them to find out. In order to fit a 60mm on mine I would need the whole system incl cat new. Erhh I don't think so, So I went to Andrew page in Leicester about my problem. 1 hour down the line I picked a 50mm clamp for a volvo exhaust up. Don't know where they got it from but it fit and is all fine now. Just come in. Did it straight when I came home, even is still minus 2 and snow on the ground. Plastic sheet and jack plus 3 coats. Lol Test drive in the morning. Want to get warm now. ( I don't know why this car has a 50mm but I actually went under the car to get the size and it is a 50mm. Strange as I expected the exhaust was at least once changed as it is a r reg and I am the 3rd owner. )

Post 565026 by partsforvolvos.com on 2013-01-22 16:39:24

not the best day at all to be outside !! i know the rear box pipe is smaller on the 99-2000 cars, so maybe this car has got a later exhaust fitted. its really unusual to replace a system other than damage or the support bracket being corroded. the actual systems last forever!

Post 565171 by v70tom on 2013-01-22 22:02:37

The box had a hole on top and the rear of the box welding was corroded to nothing. Got a straight through pipe and replaced the box but was far too loud. Lol So bought a second hand exhaust same as I have on and fitted that one on. There came the problem, the clamp was falling off as soon I tryd to open the bolts. 2 weeks nearly every day for an hour I tryd to solve this problem. Every joint clamp I could find I tryd , nothing, ordered one from volvo last week and came on Friday, too big (60mm) So carried on hunting for one. Finally got one and Pitt it on when I came home today. Sealer (exhaust paste to it) and tomorrow morning I hope is nice and quiet again. Don't know why my car has a 50mm exhaust but it was on and when I called the breaker for one he asked which one, so he actually had a 60mm and.a 50 mm. Got the 50mm to make sure it's the right one, even they look similar.

Post 565179 by merc85 on 2013-01-22 22:16:19

Ive sold a quite few of these now over the years, VOP32 i belive is the timax number, thought there was only one tbh will check in the morning out of interest and let you know. Andrew page are certainly a good Motor Factor :)

Post 565405 by merc85 on 2013-01-23 17:21:59

i know you have sorted it but.. Just a update there is a difference in the size of the clamps n/a to turbo. n/a 430424 £4.80 inc vat plus postage Turbo 430234 £5.45 inc vat plus postage http://www.cgmotorfactors.yolasite.com/

Post 565451 by v70tom on 2013-01-23 19:36:25

Thanks. Should know that before I started. Ha ha Yes can only recommend Andrew page. Sorted me some problems before with my v6 rover out. Well I changed some chastise in my lifetime, rather not doing it, but well. With great distance I never seen such a stupid thing like the v70. Lol