Been looking at fitting a rip kit to the beastie, but am getting confused with to go about it. So could any of you point me in the right direction as in whats required and how you go about fitting said thingy. Cheers in advance guys.
p fandango has a decent diagram for this..
Turbo to Intercooler
Intercooler to Throttle body
aslong as you not got an me7 engine.
All from the existing pipe work, except the black silicone straight across the engine. this was a mock up before i got some silicone hoses.
[quote=p fandango;507446]Turbo to Intercooler
Intercooler to Throttle body
[/quote]
Would it be possible to find a place for a dump valve in here?
[quote=AcidicDavey;508135]Would it be possible to find a place for a dump valve in here?[/quote] a dump valve can be T'd in, you want it as near to the throttle body as possible. I also forgot you need a 19mm port welding in by the throttle body to connect the pipe for the idle control valve
No need to weld a 19mm port with the home made R I P. Although the alloy ones look nice
can someone tell me the bore sizes thats needed for all the RIP kit please? cheers
[quote=daza-b;508160]can someone tell me the bore sizes thats needed for all the RIP kit please? cheers[/quote] i think the standard pipework is 2.25"
I built mine out of 2.5inch steel tube and sprayed it silver.
thamks for the help so far chaps, do you know what size the silcon hoses need to be at car attaching ends. Ta
has anyone got any info on a me7 rip kit? ive got a standard volvo one on my 850 can that be modded?
Hi chaps, I,ve been taking bits to peaces to get sizes but cant the size os the spigot/outlet tube thingy on the bottom of the intercooler. Can any body help please? Ta Dean
[quote=kfc;516955]Hi chaps, I,ve been taking bits to peaces to get sizes but cant the size os the spigot/outlet tube thingy on the bottom of the intercooler. Can any body help please? Ta Dean[/quote] My 850 intercooler lower outlet is 57 m/m, hope that helps.