Swirl marks and surface scratches.

Posts

Post 353897 by The Flying Moose on 2011-01-09 17:34:35

Hi All, After some advice. I have never had any problem cleaning and polishing cars in the past but this being my first black car I have to admit Im struggling. I spent a good few hours cleaning and waxing on Saturday but to no real avail if anything the swirl marks and scratches (look to be surface) just seem to be more obvious now than previously. What is the best thing I can do? I hate looking at it at the moment and want to throw mud all over the car so I cant see the scatches. The bonnet looks like an ice skating ring. I can take pictures if neccessary to aid diagnosis. Cheers

Post 353973 by blackr on 2011-01-09 21:07:58

Know that feeling well, sounds like it would benefit from a machine polish to remove the swirls. but if your after a less extreme fix possibly try autoglym srp or poorboys blackhole to offer some filling effect followed by a quality wax for the protection.Quite honestley the best place for options would be detailing world Check out the washing technique to reduce further swirling.

Post 353976 by Tomcat on 2011-01-09 21:20:34

Gotta agree with the Poorboys, used to use that on my black R.

Post 353981 by The Flying Moose on 2011-01-09 21:29:13

Thanks chaps, poorboys seems affordable too at £12 a bottle. My only concern is it says this on some websites: Poorboys Black Hole Show Glaze for Dark Vehicles allows you to hide minor imperfections on dark vehicles until you can remove them. Does this mean you need to use another product first?

Post 353996 by macp on 2011-01-09 23:02:51

[quote=V70ETS;353981]Thanks chaps, poorboys seems affordable too at £12 a bottle. My only concern is it says this on some websites: Poorboys Black Hole Show Glaze for Dark Vehicles allows you to hide minor imperfections on dark vehicles until you can remove them. Does this mean you need to use another product first?[/quote] I have also had black cars with the same imperfections as yours and the best and only way to get the very best results is to machine polish it.A rotory polisher will cost you less than 50 quid plus a couple of pads and some Menzerna polish.Get yourself an old scrap bonnet to practice on or go for it and take it steady.You will love it.

Post 354000 by LiamT4 on 2011-01-09 23:11:24

Sounds to me like you need to get all the old wax off the car and get right down to the paint to remove the scratches. As people have already said, a machine polish is a good way to remove scratches/swirlmarks. A good detailing place should be able to do this for about £50.

Post 354045 by Wobbly Dave on 2011-01-10 12:23:18

I will detail your next car. ;) I doubt the scratches will buff out of this one?

Post 354051 by The Flying Moose on 2011-01-10 12:32:57

[quote=Wobbly Dave;354045]I will detail your next car. ;) I doubt the scratches will buff out of this one?[/quote] I think you may have a point Dave. Thanks for the kind offer though :)

Post 354052 by Wobbly Dave on 2011-01-10 12:35:32

Sadly you only get to be a Flight Lt. in the Volvo Aviators. I made proper air - hence Wing Commander was where the Senior Member tag was for sometime ;).

Post 354305 by The Flying Moose on 2011-01-10 23:30:09

[quote=Wobbly Dave;354052]Sadly you only get to be a Flight Lt. in the Volvo Aviators. I made proper air - hence Wing Commander was where the Senior Member tag was for sometime ;).[/quote] If you want to promote me to Flt Lt that would be fantastic, a damn site more money than my current position of SAC (senior aircraftsman) The question is who is the squadron leader in the middle of us both?

Post 354307 by Wobbly Dave on 2011-01-10 23:33:48

Position is currently vacant. Given that you did such a good on this - there may yet be a further promotion??

Post 354309 by The Flying Moose on 2011-01-10 23:36:43

[quote=Wobbly Dave;354307]Position is currently vacant. Given that you did such a good on this - there may yet be a further promotion??[/quote] I hope not I dont fancy another accident anytime soon! On a serious note I think I may play with the heavily scratched bonet to see what I can do.

Post 354311 by Wobbly Dave on 2011-01-10 23:39:08

I have the tools if you wish to borrow them?

Post 354314 by The Flying Moose on 2011-01-10 23:46:00

[quote=Wobbly Dave;354311]I have the tools if you wish to borrow them?[/quote] Its ok thanks, always a fan of elbow grease :)

Post 354693 by mikey on 2011-01-12 09:57:03

It's a shame you are not closer to me as i own a valeting business and i would get them machine polished out if they weren't to bad,based in Bexhill near Hastings.