M-R-P (Friday 2nd January 2015)
So yesterday the gearbox arrived!Woop woop.
Today i spent the afternoon degreasing and cleaning all the oil and crap off it. Was a bit of a mission, but got most of it off![]()
Now just need to fit the thing... I have no idea how either lol
![]()
![]()
![]()
Count the number of splines on the output shaft, it should be 23.
I would have thought you'd have an LK box, rather than an L but at least it'll accelerate nicely![]()
19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...
310.2bhp / 333ft/lb
2016 Swedish Day UK "Best Modified Swede"
SOLD![]()
Got an old discovery now.
Its the only gearbox I could findIts better than what I have already
And yeah, acceleration is always better than top end around here as you cant really go fast, but you can get to the speed quicker
And if the output shaft is the bit of metal sticking out in the middle with the green rubber housing, then it has 20 splines instead of 23
Last edited by ovloVolvo; Friday 9th January 2015 at 03:37.
19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...
310.2bhp / 333ft/lb
2016 Swedish Day UK "Best Modified Swede"
SOLD![]()
Got an old discovery now.
Nice thread, very dedicated and I think I'd have given up long ago with the problems!
Did you buy the complete boost hose set or just the one piece? How difficult would it be to change all hoses with the engine/ancilliaries in-situ?
I was thinking of buying one of those £70 Ebay China boost hose sets to see if my original Volvo hoses are hiding any leaks (as far as I know they're not)...
I don't have either... Maybe I'll wait for a leak before attempting such things![]()
Damn, well always look for a positive... means I get to save for a new clutch as well![]()
Will try fitting it when I get the other one out. Unfortunately the weathers been pretty bad so everything is sort of on hold.. Sorta
Also, kmb, I bought it on ebay for £5 just to see if would fit. They sent me the wrong size. (63mm instead of 51) Now ordered another part so awaiting delivery on that.
I havent found a 'kit' for the p2 yet, apart from on the IPD website, but their prices are a bit too high for my liking. Plus, its US, so shipping to UK cost a tonne too!But, Will keep this thread updated on a regular basis so I'm sure it might help you somewhere along the way
![]()
kmb (Friday 9th January 2015)
kmb (Friday 9th January 2015)
Change the Clutch Slave cylinder at the same time buddy,Should come with the Clutch when you order it.
I've just fitted my clutch onto the new block, the gearbox is ready to go back on now.
Also you will need to manufacture a tool to set the clutch up prior to putting it onto the Flywheel. unless you purchase one from Volvo. I used a valve spring compressor and a couple of tins to compress the finger like springs. (check out the Haynes manual for a guide.
RichT4 (Friday 9th January 2015)
Started work on the gearbox. First time doing anything like this so I do have a friend helping (Or doing most of the work) And it should be out, ready for the new one to go in very soon. Just need to order that clutch!
![]()
![]()
Ex Police V70 T5 SE now scrapped.
Daily driver V60 D3 R-design
2004 C70 2.4T GT, modifications front strut brace, 19" Peg reps with white lettered tires.
Thought Id update you all as I havent been very active lately. Had other things to amend too. BUT, Good news is, New parts Listed below! :
Sachs new clutch, 20 tooth.
Do88 boost pipes (In blue!).
Inlet manifold gasket.
Throttle body gasket.
Window sticker, because everyone loves a sticker
The gearbox is almost out. Just needs the correct weather to finish it off. Other gearbox is still all good, test fitted the clutch in it and seems to be all good. thank God
Any other updates I can think of I will post later, struggling to think of everything atm haha. Happy days, peace![]()
they may be blue but DO88 do some rather nice piping. also where did you get the giant sticker from? i got one but its teeny and black so useless to me XD
The Scrapyard Saved 740
Yeah I know. I wanted purple but at the end of the day, its a good brand and still got the 'modified' look to it to anyone that looks under the bonnet![]()
I got the sticker on good old ebay, but I got a friend that has a buisness in doing custom stickers, badges and banners, so if you cant find what you are looking for, i can send you a link to his facebook page and he will be able to do pretty much what ever you want![]()
if ya could. i do want a lil custom sticker for the rear load area windows on the dinosaur
The Scrapyard Saved 740
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks