Which one gets your vote?
https://www.jetex.co.uk/jetex/store/...productId=2079
or
http://kalmar-union.com/parts/volvo-..._v70-exhausts/
Which one gets your vote?
https://www.jetex.co.uk/jetex/store/...productId=2079
or
http://kalmar-union.com/parts/volvo-..._v70-exhausts/
Ferrita have got a better name, but normally dearer with it. HLM were cheapest when i was after one
Bearing in mind that the Jetex link is +VAT, it's cheaper here:
http://www.motorsportworld.co.uk/det...H0R&PID=907143
2005 (163) V70 D5 SE Premium Pack 130k. 10" sub/Fli amp with Grom audio kit. Shark stage 1 with EGR delete and 320mm discs. Enjoying the comfort and (relative) economy.
£600 for a downpipe, is it worth it?
You will free up the top end and reduce spool time more with a downpipe than a cat back so yes - there is good value in a nice map and full exhaust. You won't get the same gain in performance from £600 on a downpipe as you do from £600 on a good map so it depends on your budget and how much poke you want.
2005 (163) V70 D5 SE Premium Pack 130k. 10" sub/Fli amp with Grom audio kit. Shark stage 1 with EGR delete and 320mm discs. Enjoying the comfort and (relative) economy.
Cheap one will work just as well. Can get a second hand front pipe and system for about £150.
I've got the OBX system on which is a good fit. Just got to modify the front pipe a bit.
Last edited by cherry1809; Wednesday 12th October 2011 at 13:44.
Current Chariots...
Micra K11 'project sh*tbox'
V70 D5 daily
1991 Transit Recovery
See you can get this from the USA for £180 delivered.
http://www.ebay.co.uk/itm/OBX-RACING...ht_1548wt_1163
Plus import taxes, duties, and handling fees. Add another £100 easy, quite possibly more!
Alastair
Current: 2009 Cayenne GTS and a 2016 Prius IV... yes.
Previous Volvos: 2009 V50 D5 R-Design, 2005 V70R, 2001 V70 T5, 2001 S40 T4, 2x 1999 S40 T4, 2003 V40 T4, 1999 V70 T5, 1996 854 T5 & 855 T5, 1995 855 T5, and a 480...
Previous other stuff: Saxo Turbo, 2004 996 C4S, 2008 Z4M, 2001 Yaris T-Sport, 2002 S2000 Mugen, and a 1999 Evo VI
If you have a word with a lad called Jase from PP Tuning in Louth - but saying that i dnt know were u are...he was going to make me a s/s 2.5" 380 for a cat back or 80 quid for a turbo to back.
I hav e had ferrita before and they are good. Jetex are the same exhaust thou!
I would not have either now but i would give TME a try!
2014 V60 Polestar 6spd Auto :: Polestar map peak boost 17.4psi :: IPD 3" DP + 150cel :: Polestar 2.5" exhaust :: Paddle Shift Geartronic :: Black glass :: Maxton Splitter :: K+N Filter :: IPD Aluminium Top engine mount :: Brembo 6 pots :: 20" Polestar rims :: Brembo 371mm floating discs :: Sensus RTi + DAB + BT + WIFi :: D3S XENARC 6000k Active bending headlights
Going back to the downpipe I posted above from ebay, it says this.
"Please note that this down pipe eliminates the factory emissions system so you will not pass emissions tests with this part installed."
Is that right?
Still think it's a good price, but not sure if it's any good.
2005 S60 T5 - Remapped 321BHP
From the looks of it, there are fittings for both of the lambda sensors.
One is usually before the cat and the other is either on the cat or after it, so no, it won't pass the emissions test with this sytem fiited.
"The problem with internet quotes, is that you don't know if they're real or not" - Abraham Lincoln
is that normal for a downpipe or just this one in particular?
2005 S60 T5 - Remapped 321BHP
They can very, i had an obx downpipe (for 850/s/v70) and it was just the dp, so you would fit a cat yourself.
If you have a good custom exhaust place nearby, go have a chat with them. It may be cheaper than you think.
Place near me could do a full S/S sytem, 3", with 100cel race cat for about £600-700, depending on how much of a bugger the dp would be to get off.
"The problem with internet quotes, is that you don't know if they're real or not" - Abraham Lincoln
both over priced in my opinion. £100 for a full sysem is a lot of money. i built my 3"100cell down pipe for less than £100 but i did manage to get the cat very cheap off ebay. its prob not the best build ive done but it was done in my breaks at work so it was rushed but it dose the job. im going to build my self another one soon. just waiting of some funs clearing then im getting my self another tig set. same with my exhaust that was built for around £150. ive built a few systems now for my t5 but i soon get sick if the noise and sell up.
fitting the 100cell cat was the best thing i did. this allowed me to go stage 2. but i wouldnt be spending £600 on one
for the next one im building my self im getting some 13mm stainless flanges laser profiled.
i used make all sorts when i was into the mondeos. had allsorts on the go and made a good name for myself but in the end it kind of took over my life. money was great but i couldnt keep up with demand. it wasnt so much the welding and fabrication that took up the time it was the chasing up suppliers for not delivering profiles when they said they would and thing like that.
but like i said earlier i am getting another tig set and will be building a few bits and bobs to sell on( i kind of miss having the odd little project). if youd like id build you a 3" sports cat. id have to price up materials and get the stainless flange machined so the exhaust gasket sits inside the flange. the quality would be a lot better than mine. that was built using off cuts i had lying around. i would never send anything like that out to a custermer
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks