P2 V70R / S60R Rear Springs - New needed or replacement of std R height

[jellison]

Hi all,

so what do any of us do when they need a rear spring for the above (either bust or just old), need to get car back to std original ride height so a 4 wheel alignment will actually stop tyres from burning out inside edges (need to get them back up to full height - god knows why anyone would want lower than an std R!! and mine are obviously old and shorter than original now).

Volvo PN is 30645725 - but discontinued globally. You can crazily still get the fronts (well in US - local volvo dealer after waiting all day not gotten back to be yet!!!!).

What is everyone doing?

This is NUTS.

[uqj83l]

You could buy and fit camber bushings to correct excessive camber. Or to raise the ride height a smidge (say 10mm) you could use a grayston spring assistor G14 which is commonly used for towing to maintain the ride height of the rear. The easiest camber bushings to fit are made by SilverProject.