get rid of the t piece ££££e metal thing between the intercooler and throttle body.
get rid of the t piece ££££e metal thing between the intercooler and throttle body.
I think we may of found the problem!
Sent from my SM-G920F using Tapatalk
The bolt from around the oil seal?
I called it
Last edited by Dangerous Dave; Tuesday 9th May 2017 at 21:15.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
2014 V60 Polestar 6spd Auto :: Polestar map peak boost 17.4psi :: IPD 3" DP + 150cel :: Polestar 2.5" exhaust :: Paddle Shift Geartronic :: Black glass :: Maxton Splitter :: K+N Filter :: IPD Aluminium Top engine mount :: Brembo 6 pots :: 20" Polestar rims :: Brembo 371mm floating discs :: Sensus RTi + DAB + BT + WIFi :: D3S XENARC 6000k Active bending headlights
So we decided on pulling the engine rather than trying to get the gearbox back on underneath the car with limited access. Plan now is the following;
- New clutch and/or flywheel (dogdish)
- Replace all pipework
- New actuator for the turbo
- Clean down and repaint block
- Wrap exhaust and downpipe
Will update soooon..
Sent from my SM-G920F using Tapatalk
Maybe worth porting the exhaust manifold whilst it's off as from what I remember they are restricted at the collector.
Ported (though not pretty) vs standard
Last edited by Dangerous Dave; Saturday 25th February 2017 at 20:19.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
We are definately porting all the above, ours has lots of inperfections in the casting so have gone through a few dremel heads already... Slow progress but we are aiming for completion by June
Sent from my SM-G920F using Tapatalk
You need a carbide burr bit:
http://www.ebay.co.uk/itm/INDUSTRIAL...QAAOSwd0BVvxrt
Will go eat the metal a bit quicker, it's what I use for my manifolds plus it doesn't wear out quickly (had mine for years)
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
LeeT5 (Monday 12th June 2017)
So everythings bolted back together and the engine is back in the car. Two issues we have before it will start-
- Which way round do the hoses go into the inlet manifold?
- We are getting no spark from the distributor so will need to have a look into that..
Sent from my SM-G920F using Tapatalk
Any updates??
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks