Personally I use the smallest stud extractor I can then increase in size until you get lucky - drill a hole then put the stud extractor in, which will find purchase by turning in the opposite direction to that needed to tighten the head bolt
As above, a guide will help (something cylindrical with a hole to centralise the drill bit & stud extractor on the damaged section)
JT (Thursday 14th April 2016)
Nice one, so how do you use them?
PIC][/SIGPIC]
aaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa
Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread
claymore (Thursday 14th April 2016),craigoodwood (Saturday 23rd April 2016),Jamest5r (Thursday 14th April 2016),jamesy12345 (Thursday 14th April 2016),Nealevo (Friday 15th April 2016)
So it appears square pegs into round holes works then.
JT (Thursday 14th April 2016)
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
Will have to get a set of them and sort my spare block out, nice job It..:-)
Sent from my C6903 using Tapatalk
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
Dangerous Dave (Sunday 24th April 2016)
That's really good news, could probably help a few others on here!
Are you sticking with a pre ME7 head, or going for a ME7 with VVT delete?
Only asked, as Deathrider's selling a ME7 head.
JT (Saturday 16th April 2016)
pulled the car out of the garage today, to have a sort out and found even more damage! lol
front bumper that's been hiding in the car:
and the rear axle has moved quite a bit, you can see the bent spring mount and the contact mark on the axle:
car is now sitting low on this corner for some reason, I'm sure it will sorted when the new rear axle goes on.
and finally another Volan! lol
Happy days! lol
craigoodwood (Saturday 23rd April 2016),Jamest5r (Saturday 23rd April 2016),Shinsplintz 101 (Saturday 23rd April 2016)
Well, if none of us 850R owners can find a spare Volan in a couple of years we'll know who to blame eh!?!?
you running genuine rear coil-overs? when did you get them lol
There are currently 6 users browsing this thread. (0 members and 6 guests)
Bookmarks