From a distance (maybe a substantial one) you could maybe get away with saying the pegs were refurbed with a polished lip...would mean kerbing the other 3 to match though
From a distance (maybe a substantial one) you could maybe get away with saying the pegs were refurbed with a polished lip...would mean kerbing the other 3 to match though
PIC][/SIGPIC]
aaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa
Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread
small update....the new exhaust flange is taking shape and a last minute bargain arrived tonight to compliment the 3" system, a ultra cheap s60r manifold and only 4 miles away (thanks Alex, he did make me put that ...lol)
IMG_20160306_125215_730 by moleadrian, on Flickr
IMG_20160306_125252_940 by moleadrian, on Flickr
IMG_20160306_205745_025 by moleadrian, on Flickr
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
claymore (Sunday 6th March 2016),Jamest5r (Sunday 6th March 2016),JT (Monday 7th March 2016),smithy (Monday 7th March 2016),The Flying Moose (Sunday 6th March 2016)
well on closer inspection, I feel the angled flange and manifold both need some opening up
IMG_20160307_122638_041 by moleadrian, on Flickr
There is a lot of metal to come from the manifold to turbo flange as this looks quite restrictive and also could do with some knife-edging inside too, I would like to port match the the head but time could be against this at present and I would also wind up do it again, when the new head is ported fully, so seems a bit of a waste of time to do now and not the easiest job to do right with the engine still in the car, but I will check it and if it's going to be an just a tickle in the exhaust manifold ports, it will get done at fitment. I'm not going to mess with the head whilst it's in the car, as it's difficult to get at properly and who knows were the swarf could wind up.
IMG_20160307_122415_252 by moleadrian, on Flickr
The angled flange could also be opened up and smoothed out a tad to improve the transistion for the gases from the manifold through into turbo housing
IMG_20160307_122425_190 by moleadrian, on Flickr
Last edited by MoleT-5R; Monday 7th March 2016 at 22:05. Reason: picture duplicated
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
Coming along nicely! I don't get on much and it moves forward quickly for me viewing it now
At least that turbine housing is better than the smaller td04hl housings, here's a comparison
Last edited by Dangerous Dave; Monday 7th March 2016 at 23:31.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
Think the bigger one is the 7cm2 housing and the smaller one is a 6cm2 housing.
Problem with the smaller one is it doesn't match the output from the exhaust manifold (on the more open japanifolds and s60r manifolds), that tight neck closing in quickly I guess wouldn't help (but then I don't know anything about flow and restrictions, etc LOL)
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
19t, greens, 3" everything... (some girls don't like it that wide)
Stop buggering about ade..
Go big or go bang
19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...
310.2bhp / 333ft/lb
2016 Swedish Day UK "Best Modified Swede"
SOLD
Got an old discovery now.
jamesy12345 (Tuesday 8th March 2016)
lol....Martin, could have fitted a 19t and greens years ago, they've been sat on the drive here on the v70r for a couple of years now, keep toying with a bigger turbo, ut I really would just like to sneak into the 13's before I change it, daft I know but I'm still dead set on proving Frankie wrong and I'm only 0.4secs away from doing it.
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
M-R-P (Tuesday 8th March 2016)
It'll get opened up this weekend, when I can get it into work and can get at it with my ata gun and a carbide bit. I might get the lads on the shot blast to freshen the manifold up looks wise and then give it a nice coat UHT paint when I get home. I am considering making some form of crude flow bench just so I can see how much difference there is between the japanifold and the s60r item if there's time to compare them.
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
Coming along well mate, look forward to seeing the result April!
Arguing is pointless....she may not be right but she's never wrong
Tell her a remap is just having your satnav updated.....
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
Molesport Engineering been busy again and completed the new 3" exhaust flange ready for the down pipe modification to allow it to fit the angle flange.
Started as a roughed out blank.
IMG_20160217_222517_701 by moleadrian, on Flickr
Roughed out shape.
IMG_20160306_125252_940 by moleadrian, on Flickr
IMG_20160318_142053_396 by moleadrian, on Flickr
IMG_20160318_142147_647 by moleadrian, on Flickr
Finished Item.
IMG_20160318_142053_396 by moleadrian, on Flickr
IMG_20160318_142229_325 by moleadrian, on Flickr
got a bit of work to do to mod the downpipe to work, very tempted to make a completely new one as some of the welds look a bit restrictive but they may not be, it's functional but it just looks a bit cobbled together imho
IMG_20160318_142102_846 by moleadrian, on Flickr
IMG_20160318_142038_616 by moleadrian, on Flickr
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
claymore (Saturday 19th March 2016),craigoodwood (Saturday 19th March 2016),Jamest5r (Saturday 19th March 2016),martin_r_smith (Saturday 19th March 2016)
Bit of grinding and polishing sorted, but not sure whether these bits will make it on to the car for shakey next weekend, the pic's of the finished items aren't the best, but I'll try to get some better ones before fitment.
The angled flange
IMG_20160307_122425_190 by moleadrian, on Flickr
IMG_20160324_095844_567 by moleadrian, on Flickr
IMG_20160324_095921_162 by moleadrian, on Flickr
IMG_20160324_095945_576 by moleadrian, on Flickr
S60R manifold (looks restritive in standard from)
IMG_20160307_122415_252 by moleadrian, on Flickr
Opened up and knife edged with some light polishing (not than the pics show it too well)
IMG_20160324_100022_540 by moleadrian, on Flickr
IMG_20160324_095833_586 by moleadrian, on Flickr
I'm still not sure this manifold will produce any more power than my japanifold in my current state of tune, but we'll give it a go and see if it makes any difference to the 1/4mile times.
Current Japanifold (modded) v standard item
S60r
IMG_20160324_095824_432 by moleadrian, on Flickr
so other than some port sharing there's not much difference in them now they're both knife edged internally, may look at somehow making a flow rig to measure them later on, but flow is one thing, making power on the dyno can be a totally different thing.
Last edited by MoleT-5R; Monday 28th March 2016 at 10:30.
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
craigoodwood (Monday 28th March 2016),Dangerous Dave (Tuesday 29th March 2016),S70T5Chris (Monday 28th March 2016),Shinsplintz 101 (Monday 28th March 2016)
Looking good needs a new leaf blower now to make the most of that porting
That is a good point Stewart, it is currently in hand and should be happening some time this season when I hope to be datalogging as well, so hopefully we can alter the map/maps to suit as we go.
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
you've got to get them fitted before Shakespeare, interested to see how it all goes with the 15g
That will all depend on access to the tig welder as we are on factory shutdown at present and the downpipe will need modification to suit the angled flange, even if these bits don't get on for the first race, they should be on for the next one. Times should improve at shakey as we've done a 14.3 at york and shakey is definitely far more grippy, but I don't think it will give the full 0.4sec improvement I'm looking for.
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
Well it's time to sort the Olive out for her mot, which was due a few months back, but I parked her up for a while. So time to sort the front arch liners and bumper alignment/attachment as they didn't like it last year and whilst I'm in there pop the new oil cooler on, change the exhaust manifold and turbo exhaust housing, all bits aare done and ready to fit for the dv re-circulation so that will go on too. Thinking about also doing a pcv delete and plumbing in a nice catch tank in place of it, if I can decide where to mount it that I'm happy with. I'm also going to remove the nivomats from the rear and replace with the fk's that I had off of Colin some years back, these should stiffen the rear on end compared to how she is now, would have fitted these years ago but I like the way I could seriously load the car and 1/2 a mile down the road alls level and no one as a clue how much weight I'm carrying, but after watching a few vid's of my 1/4 starts something has to be done to address the rear end squat and bc's are out of the question at present unfortunately, so will have to stay on the wish list a while longer
Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
My Ebay Items http://www.ebay.co.uk/usr/quik.connection
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks