I'm right in thinking these will fit my 2001 t4, but might need a bracket made up so it doesn't touch the stub axle.....?
Anyone know of anyone that's done this?
Thanks tom
I'm right in thinking these will fit my 2001 t4, but might need a bracket made up so it doesn't touch the stub axle.....?
Anyone know of anyone that's done this?
Thanks tom
2001 V40 T4 phase 2, B4194T2, custom FMIC, 440cc injectors, customer intake from turbo, custom ss 3" turbo back exhaust, Subaru Sti back box, T5r clutch, T5 lightened flywheel, evo 3 twin pots and discs....more coming
I've seen some Evo 3's from Japan with them fitted & AndyP mocked up a set but never ran them. Freaky parts sell a bracket to fit them to an FTO which would fit an S40. http://www.freakyparts.co.uk/FTO-Bra...r-GTO-calipers
Tommy t4 (Sunday 28th February 2016)
2001 V40 T4 phase 2, B4194T2, custom FMIC, 440cc injectors, customer intake from turbo, custom ss 3" turbo back exhaust, Subaru Sti back box, T5r clutch, T5 lightened flywheel, evo 3 twin pots and discs....more coming
3000gt are a bit smaller than Evo discs, if you got Evo Brembo's & adapters from Racefab you could run 330mm Evo discs.
At the bottom of the page it says:
The additional parts required for this kit are:
• GTO Mk 1 calipers (with shorter lugs) for 296mm disks
• GTO Mk2 pads used on 313mm calipers
• Nissan 350z Brembo edition disks, 324mm diameter
• Custom length brake lines
I would email them, the guy is pretty active on the early Evo forum selling Wilwood stuff.
Tommy t4 (Sunday 28th February 2016)
2001 V40 T4 phase 2, B4194T2, custom FMIC, 440cc injectors, customer intake from turbo, custom ss 3" turbo back exhaust, Subaru Sti back box, T5r clutch, T5 lightened flywheel, evo 3 twin pots and discs....more coming
I've bought a lot of Evo parts from these guys, they are great to deal with. They are easier to contact on Facebook though. They sell front an rear adapter kits for the early Evo. http://racefab.co.nz/
Tommy t4 (Monday 29th February 2016)
I've just bought the calipers (4pots) for a bargain of eBay, and some discs too so pretty sure they should fit in my wheels, just need this brackets now next week!
2001 V40 T4 phase 2, B4194T2, custom FMIC, 440cc injectors, customer intake from turbo, custom ss 3" turbo back exhaust, Subaru Sti back box, T5r clutch, T5 lightened flywheel, evo 3 twin pots and discs....more coming
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks