looking good. now get the black trim on bumpers and sills painted. bet rs wheels would look good
looking good. now get the black trim on bumpers and sills painted. bet rs wheels would look good
s60 2.4 t5 eibach springs,up rated rear anti roll bar, poly bushed wishbones, poly lower engine mount, fmic, bmc air filter, 3" decat, 2.5" stainless exhaust,hlm remap 328bhp,
2 months since I updated this thread. Basically the thing hasnt moved for that long the tyres have gone flat.
just sent the mrs out to take a pic of it looking sorry for itself.
it needs quite a few bits doing to get it back to a decent standard as soon as I get home it will be getting.
2 new tyres
Window regulator fixed. Dunno if you can see in the pic but its held up with paper.
ever so slight oil leak needs looking at. Hence the card board underneath.
I do have a set of discs and volvo pads and arb links sat there that need fitting.
So basically a days work and couple of hundred quid then I will see about getting it mapped and an exhaust fitted. Hopefully graeme will be back on his feet soon lol
leet5r (Monday 2nd September 2013)
ya mean back on his foot lol , sorry bad joke
danny-R (Thursday 5th September 2013)
Looks like the volvo will be getting reflashed today and the guy reckons about 60bhp gains best thing is its cost me nothing. Just skimming his kitchen ceiling as payment as we speak. Hopefully be done by the time im finished in a couple of hours. Watch this space
M-R-P (Thursday 5th September 2013)
It worked. Feels faster and more responsive but still needs more boost lol will get it on a rr at some point to see what the gains are. 2nd isnt much different but 3rd and 4th have improved massively. Might try and do a 60 to 100 test later down my private driveway
s60 2.4 t5 eibach springs,up rated rear anti roll bar, poly bushed wishbones, poly lower engine mount, fmic, bmc air filter, 3" decat, 2.5" stainless exhaust,hlm remap 328bhp,
Probably not a patch on the likes of mte etc but its a definite improvement over standard. Just in time for the drive to trax. Its a bonus it only took me a couple of hours yet only took him about 20mins lol
s60 2.4 t5 eibach springs,up rated rear anti roll bar, poly bushed wishbones, poly lower engine mount, fmic, bmc air filter, 3" decat, 2.5" stainless exhaust,hlm remap 328bhp,
I have no doubt yours will be a fair bit quicker lol. I'll give you a ring next week sometime to arrange a time etc. I know what its like being cooped up
yours will be at the stage wear the cat is holding it back. mines running stanard cat at minute and i can feel it holding back. day out tomora. going to see me favourite nurse at rvi.
s60 2.4 t5 eibach springs,up rated rear anti roll bar, poly bushed wishbones, poly lower engine mount, fmic, bmc air filter, 3" decat, 2.5" stainless exhaust,hlm remap 328bhp,
I think I will get that cat back you made and just keep it on the backburner till you can do me a dp and decat.
I think the rear lambda has been mapped out so no need for a spacer
its a good that exhaust. itll work well with a decat. getting some flanges machined tonight. need to try and make some money again
s60 2.4 t5 eibach springs,up rated rear anti roll bar, poly bushed wishbones, poly lower engine mount, fmic, bmc air filter, 3" decat, 2.5" stainless exhaust,hlm remap 328bhp,
What's the tailpipe like? Will it need it extending to fit the v70?
danny-R (Thursday 5th September 2013)
danny-R (Thursday 5th September 2013)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks