hose clamps

**brett craig** · Monday 19th July 2010, 22:07

Where can i get and what type of clamp for my rip hoses.

there 76mm and the metal pipes are smooth so keeps blowing hoses off, need something bloody strong !

**t5 pete** · Monday 19th July 2010, 22:21

first off you will need some brake and clutch cleaner or alike to remover all oil off the joints and then use Tbolt clamps where a inch wide and have some really good grabbing power but if you rip kit is plastic they might be too much for it as it will just deform the plastic pipe

**brett craig** · Monday 19th July 2010, 22:25

cheers pete, there stainless metal 76mm mate, any specific place to get the clamps from or is it a ebay job ?

**t5 pete** · Monday 19th July 2010, 22:30

i got all of myne form ebay there were the cheepest around like these ones
http://cgi.ebay.co.uk/T-BOLT-POLISHE...item483af476f8

**brett craig** · Monday 19th July 2010, 22:40

sorted, just ordered in bulk from ebay, £23 to the door but that for 8 x 76mm and 5 of other sizes. cheers for the headsup pete.

**Rnash2002** · Monday 19th July 2010, 22:49

Originally Posted by t5 pete

i got all of myne form ebay there were the cheepest around like these ones
http://cgi.ebay.co.uk/T-BOLT-POLISHE...item483af476f8

I use them,took me a while to find them but well worth it in the end.

**brett craig** · Monday 19th July 2010, 22:54

Originally Posted by Rnash2002

I use them,took me a while to find them but well worth it in the end.

there the exact ones ive bought dude, be nice to have a small number of clamps rather than the amount i'm using at the minute.

theres that many on the crossover pipe it looks like a advert for selling curtain rings !!!!