Both replacement poly bushes for the tie bar are now available from PFV.
Ordered mine this afternoon- got to be cheaper than getting them from IPD.
Both replacement poly bushes for the tie bar are now available from PFV.
Ordered mine this afternoon- got to be cheaper than getting them from IPD.
got my D5 poly bushed already by Tim williams ,thing really makes a difference and is alot cheaper then the IPD which is exactly the same product according to Tim.
I take it this is the upper tie bar that connects to the 'strut brace'? I heard that if this is solidly bushed it transmits more noise into the cabin...
No Dave this under the car toward the front ,arrowed here in piccy
Ah, that one. I've just had a new clutch fitted (subframe dropped etc) so I am after doing that mod. Magic darts!
Interesting. Have you had both bushes done? PFV only did the smaller bush but have the larger one as well- the first time I've seen the large bush available in the UK.
As you have the sotware we can't mention could you give me the torque rates for the bolts?
Many thanks.
I will pm you in a while Andy .got my hands full right now..
PM sent Andy ,
regards
Mo
does this poly bush fit the 850 one????????
Not sure Pete.
The PFV part number (904479) for the tie bar is the same for 850 as S60/V70. I'm guessing that the poly bushes would fit the 850 tie bar- worth ringing them to check though!
V70/S60 http://www.partsforvolvosonline.com/...oducts_id=5774
850 http://www.partsforvolvosonline.com/...oducts_id=4479
t5 pete (Saturday 15th November 2008)
Quick delivery!
Confused however.... why two of the smaller bushes and why the strange angle on the larger bush?
Do these look right?
Might have a spare smaller bush up for grabs if it fits!
Tim Williams be the best man to confirm he had mine pre installed and ready to go.
looks fine to me.. it also looks like they possibly gave you 2 smaller bushes by mistake! lol!! the bigger bush is angled like that due to how the mount is shaped.. FWIW I've just fitted my IPD bush (large) and Powerflex (small) in the tie bar.. shipping isn't really that expensive if you email IPD for a quote IMHO - especially if you are buying a few bits! - here's a post that might help you fit it:
http://www.vpcuk.org/forums/showpost...6&postcount=32
HTH
1998 BMW Z3 2.8 Roadster
this might help as well:
http://www.vpcuk.org/forums/showthread.php?t=17411
HTH
1998 BMW Z3 2.8 Roadster
where did you get the smaller one from paul i cant find them on ipd website
t5 pete (Saturday 15th November 2008)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks