Hi All,

Just had y car on the rolling road and it only showed 160bhp, should be 240 as standard!!!

The guys cleaned the air flow meter an it was then doing 202bhp, still not quite what it should be.

They then noticed that the car was very lean under load and was showing 0.00% co on full throttle!!!! (it was showing some readings when started/idle, but none when the accelerator was pressed, they said it should be showing 5.00-6.00%)

I'm gonna get the car serviced and hopefully with the change of fuel filter, it should be ok, i was also told if this doesnt work, it could be the flow meter that needs replacing.

If its none of the above, have any of you guys any idea of what it could be (you boys at VT come across this problem, any solutions?).

What should be my next step?

Thanks in advance for any replies.