Trim change

[r07s]

Going to be changing my trim this easter break - the garage is cleared, i think i have the tools, got my haines manual - just need to find my dig camera for capturing the fun...

Anybody fancy a run out to spectate, then pm me to let me know if you want brown or red sauce with ya bacon sarnie.

http://www.vpcuk.org/forums/showthread.php?t=9432

[BlackBeast]

Sorry mate, completely forgot to do a write up. Tools you will need:-

8mm socket, extension and ratchet
T25 Torx bit
Allen key set (cant remember the specific size)

With the T25 torx bit, i used 2 ratchet screw drivers, large and a stub version.

Have a look on the rear of the facia your fitting, as thats an excellent guide of where the screws are located.

With some of the screws you will have to use the allen key, others you'll be able to use the ratchet drivers.

If you have climate control, there is no button underneath the unit like the haynes manual states, you just have to yank the thing out.

Other than that, take your time as you dont want to drop any of the screws.

Good luck

[r07s]

Cheers Steve!

Have a good break/trip eh! hope you get the boss kit!!

[Vikingxl]

You never know the Viking may make an apearence i could do with getting out of the house i will let you know!

[r07s]

You never know the Viking may make an apearence i could do with getting out of the house i will let you know!

You'll be most welcome! FYI: SL6 9NZ

Going to make a start tomorrow morning sometime (hangover permitting)...

[r07s]

So far so good - have the centre console out and currently eating lunch and reassembling the console and loom etc. Pix to follow sometime soon.