When adjusting the above is it a case of loosening the nut and turning the bar clockwise or anticlock wise, if that makes sense. ??
When adjusting the above is it a case of loosening the nut and turning the bar clockwise or anticlock wise, if that makes sense. ??
First off - If you have to ask this question then I would leave well alone!!
The answer is clockwise - and it isnt the bar that rotates - its the nut on the end (the one that is secured in place by the spring clip)
You'll need to undo the locking nut first. Remove the spring clip - Pull the bar up so it slides of the top of the wastegate flange rod - and then rotate the end nut.
If you dont have the right equipment to set up the pressure in the actuator - I would not rotate the end nut any more than 1 full turn (360 degrees)
If you get this wrong and get over zealous - you will spike your engine.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
I am trying to cross off the various things that effect my boost spool up time. I am finding with the Rica 280 that I have a second delay after I have kickedown before the boost comes in. Am I right in thinking maybe one turn on the rod may make it spool up slightly quicker ?
I would speak to VT first. Do you believe that your actuator is weak?
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Rang Adam at VT regarding my problem. I have my car in tommorow at a local volvo specialist for the codes reading and to check all related hoses.Originally Posted by Wobbly Dave
Hopefully this may show up some fault as to why it is hesitating when kickingdown.
Check your other vac/airhoses first. My PCV breather hose to the induction pipe had come out and gave the same symptoms.Originally Posted by Broaders
Swordy21
I get up every morning determined to both change the world and have one hell of a good time.
Sometimes this makes planning my day difficult.
E. B. White (1899 - 1985)
My Location
Done: (To date)
1998 V70 T5 CD.
Stage 0,
RICA ECU 310,
ITG Pro filter,
Volvo Strut Brace,
J3 Stealth Boost Gauge
Zimmerman Front (warped), Brembo Rear Rotors
PAGID Fast Road Pads
New Engine Top Mount Bush,
New CV joints,
Wobbly ABS Repair,
PCV hose running repair
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks