Join Today
Results 1 to 6 of 6
  1. #1
    Junior Member
    This user has no status

    Join Date
    Jan 2021
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Recondition or scrap ??

    Hi Guys,
    New to the site and my first post,

    I have a 2005 V70 2.4T5 , It has 138,000 on the clock, it's developed a knocking which a mechanic has suggested it could be the Camshaft albeit he's not absolutely 100%, if I remove the oil filler cap it certainly sounds as though its internal, he suggested as it's now 15 / 16 yrs old to sell it for spares / repair as it could cost me more than I paid for it ( 3000, ) 3yrs ago with 112,000 on it.

    I'm more inclined to get the engine re-conditioned, having said that I'm getting a big difference in s and Time spent to do it and there's not much choice.

    One quote was 2678.00 +vat / 2 weeks approx

    another verbal quote was 1500 / 1 week, but the cost could go up depending on what they found.

    I know to some this might be a no brainer, but I love this motor and I think the mileage is too low to just scrap her, she gets used for work ( Gardener Landscaper ) and taxi-ing the long haired general to work

    any feedback would be greatly appreciated

    Thanks

  2. #2
    New Identity
    Back in an AWD....Oh the grip!
    Dangerous Dave's Avatar
    Join Date
    Dec 2006
    Location
    West Midlands
    Posts
    8,790
    Thanks
    2,438
    Thanked 2,532 Times in 2,005 Posts
    You could always get another engine and put it in? Got to be cheaper than reconditioning the current engine, then you could sell the old engine as spares or repair.

    It depends on how much you like your car. Do you love it enough to go through with it all? Or is it just another pile of metal that gets you from A to B?

    I tend to get attached to my cars and being technically able I would do it myself if it happened to me, but not everyone is in a position to do that.
    Last edited by Dangerous Dave; Saturday 23rd January 2021 at 12:44.
    1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
    1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
    2004 Sapphire Black S60 D5 - The new daily hack.

  3. #3
    Junior Member
    This user has no status

    Join Date
    Jan 2021
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks for the prompt reply Dangerous Luv the nick: I do like this motor, I did look at finding a new motor but tbh I could end up with a motor that has a bigger problem than this one, and I wouldn't know that until it's fitted and cost me a wad, I've just taken a 15sec vid with the oil filler cap off. Vid didn't upload,
    Last edited by Shane45; Saturday 23rd January 2021 at 13:01. Reason: Video didnt upload

  4. #4
    New Identity
    Back in an AWD....Oh the grip!
    Dangerous Dave's Avatar
    Join Date
    Dec 2006
    Location
    West Midlands
    Posts
    8,790
    Thanks
    2,438
    Thanked 2,532 Times in 2,005 Posts
    Quote Originally Posted by Shane45 View Post
    Thanks for the prompt reply Dangerous Luv the nick: I do like this motor, I did look at finding a new motor but tbh I could end up with a motor that has a bigger problem than this one, and I wouldn't know that until it's fitted and cost me a wad, I've just taken a 15sec vid with the oil filler cap off. Vid didn't upload,
    It's best to upload to youtube then post it here, it should embed into the post then.

    Yes it is always a gamble with an engine with unknown history, but if you shop around the cost is way less than a recon job.
    1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
    1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
    2004 Sapphire Black S60 D5 - The new daily hack.

  5. #5
    Member
    old Volvos never die
    pepinosport's Avatar
    Join Date
    Apr 2019
    Posts
    89
    Thanks
    14
    Thanked 23 Times in 17 Posts
    Can you post a video of the noise?

  6. #6
    Senior Member
    Trying to keep on top of it
    LeeT5's Avatar
    Join Date
    Oct 2004
    Location
    Kent
    Posts
    5,296
    Thanks
    1,055
    Thanked 1,385 Times in 1,062 Posts
    If you want my opinion, then get a second opinion on the noise. If the noise if top end then you could get away with just head removal, investigation, repair or replace. That wouldn't cost more than 1000. If it's bottom end then that's a different story and would need more options weighing up.
    Sometimes it's not uncommon for a hydraulic lifter to become solid because it's gummed up with carbon build up. The absolute first thing I'd do is put some Wynns engine flush in the oil and run it up on a high idle for 20 minutes (after warming up the engine of course). Drop the oil, then replace the filter and just fill it with a cheap synthetic 10W40 and see how she sounds then. If the noise doesn't change then at least you definitely know it's going to need money spent on it and all it's cost you is 40 and a filter.

    2004 V70R 6spd manual:: Custom JRtuning REMAP @ peak 21psi :: Custom 2.75" exhaust :: TTV SMF + 07 Clutch :: WG 5.0 psi :: Tints :: IPD R gauge Rev.3 :: CFWerks door pod :: Forge CBV + yellow spring :: Windowed stock housing + blue filter :: Powerflex :: Superpro Engine mount :: Brembo Dot 5.1 :: TW FMIC :: Eibach 5mm spacers :: Brembo 330mm drilled discs :: iMiV 'Classic'+ BT :: D2R XENARC 5500k + LED H7 + LED H3 :: VolvoTech CFE OBD-V1 :: See garage for full mod list


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready