Join Today
Results 1 to 2 of 2
  1. #1
    Junior Member
    This user has no status
    V70T5SEPaulC's Avatar
    Join Date
    Feb 2020
    Location
    Nivillac, France
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Starter Motor Replacement

    Hi. My 99 T5 is suffering from a 'sticky' starter. Needs a love tap to wake it up every few start-ups. I have a replacement from the Volvo/Saab breakers in Nottingham ready to go.
    Question is : What it the recommended method. Inlet manifold off (allowing access to PCV too) or fan cowl shroud?

    (Not sure if there is a 'how too' on here that's relevant still finding my way around.....)

    Ta.

  2. #2
    New Identity
    Back in an AWD....Oh the grip!
    Dangerous Dave's Avatar
    Join Date
    Dec 2006
    Location
    West Midlands
    Posts
    8,641
    Thanks
    2,406
    Thanked 2,481 Times in 1,967 Posts
    The way I did my starter motors (having changed them a few times on my Volvos) is to remove the fan/fan shroud assembly (easier than removing the inlet manifold) and some of the intake piping and airbox, then you should have pretty good access to the starter motor.

    That is unless you want to do the PCV at the same time In which case take the manifold off as well as the fan shroud.
    1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
    1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.

  3. The Following User Says Thank You to Dangerous Dave For This Useful Post:

    V70T5SEPaulC (Sunday 16th February 2020)


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
ipv6 ready