Join Today
Results 1 to 6 of 6
  1. #1
    Junior Member
    This user has no status

    Join Date
    Jul 2012
    Posts
    9
    Thanks
    2
    Thanked 1 Time in 1 Post

    850 full performance exhaust

    Don at Kalmar Union only has downpipes suitable for 98+ cars unfortunately. Does anyone else do Ferrita? I found European Tuning but I'm wary of spending €1k+ there. Jetex only does catback as far as I can see. Anyone else? I'm in Ireland, if that's relevant.

  2. #2
    Gearbox Killer
    Proving the power of the
    15g....13.4@104.3mph
    MoleT-5R's Avatar
    Join Date
    Jun 2011
    Location
    Mid-Wales
    Posts
    5,287
    Thanks
    2,730
    Thanked 2,544 Times in 1,701 Posts
    It may be easier and more cost effective to find an exhaust specialist near to you and get a custom made one done, than trying to find a good after market dp and system for a reasonable price, plus you'd have a lot more choice in diameter of piping, tail pipe finishers and silencers etc.

    Current Volvo's 1995 854 Gul T-5R 1996 855 Olive T-5R 1997 855 Olive AWD 1999 V70R AWD and 2005 XC90 D5 AWD
    Previous Volvo's 1987 745 gle 1989 745 GL 1995 855 Olive GLE 2001 V70 p2
    My Ebay Items http://www.ebay.co.uk/sch/moleadrian...p2047675.l2562

  3. #3
    Junior Member
    This user has no status

    Join Date
    Jul 2012
    Posts
    9
    Thanks
    2
    Thanked 1 Time in 1 Post
    Ireland is a bollix of a place to get anything remotely out of the ordinary, never mind a performance exhaust. I sent my Titans to Lepsoms rather than anyone in Ireland, because trying to get straight answers - or any kind of answer - out of Irish firms was impossible*. I doubt there's an Irish firm that wouldn't just bluff their way through fabricating an exhaust with the standard "ah sure it'll be grand" attitude.

    Open to recommendations of UK firms.

    * I also took my car on a 2 hour round trip (twice, drop off and collect next day) to a garage that works on rally cars to get my coilovers adjusted, because I suspected my local indie ££££ed them up. I recently put it up on a lift myself, and found both front and back were out of whack, the front by over a centimetre.)

  4. #4
    Junior Member
    This user has no status

    Join Date
    Sep 2018
    Posts
    3
    Thanks
    1
    Thanked 3 Times in 2 Posts
    Speak to Flux Fabs. Not sure what this full systems cost but he made me a 3in down pipe + sports cat for something like £400 fitted from memory and i'm pretty sure he and Shem post stuff world-wide. Mine then ties into a Jetex catback...

  5. #5
    Junior Member
    This user has no status

    Join Date
    Jul 2012
    Posts
    9
    Thanks
    2
    Thanked 1 Time in 1 Post
    A couple of people on another forum recommended Flux so I've already placed an order.

    Does shem have a rolling road or do they just remap to a spec?

  6. The Following User Says Thank You to dahamsta For This Useful Post:

    T5Panda (Tuesday 24th September 2019)

  7. #6
    Junior Member
    This user has no status

    Join Date
    Sep 2018
    Posts
    3
    Thanks
    1
    Thanked 3 Times in 2 Posts
    Oh in fact i might have suggested it on the other forum too!


    He takes cars out to collect data/map them (live mapping?) i think but can send files etc - pretty sure he's mapped cars in NZ etc.

  8. The Following User Says Thank You to T5Panda For This Useful Post:

    dahamsta (Tuesday 24th September 2019)


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
ipv6 ready