Join Today
Results 1 to 11 of 11
  1. #1
    Junior Member
    This user has no status

    Join Date
    Apr 2019
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Looking for 2.0L T5 tuning info.. if any!

    I have recently purchased a 2014 V60 2.0 T5.
    Expecting a 2.0 petrol turbo to be easily tuneable .. Iíve yet to see any real info on tunning.!?
    Itís the B4204T11 engine..


    Any info guys would be greatly appreciated! Not looking to go crazy with the tuning but may be open for a remap, different air filter, turbo upgrade or something similar along those lines!

    I did read on an American tuning website that they dont do remaps etc.

    Any help again when be greatly appreciated !



    Sent from my iPhone using Tapatalk

  2. #2
    Senior Member
    This user has no status
    deathrider311271's Avatar
    Join Date
    Apr 2011
    Location
    Grimsby
    Posts
    1,583
    Thanks
    478
    Thanked 530 Times in 423 Posts
    Talk to these guys, they are getting some very impressive results:

    https://www.sgrperformance.com/
    P1 V70 2.5T Scorpion Exhaust, 3" downpipe 100cel cat, BSR induction, KKK24, GWE 3" Maf to turbo pipe,japanifold , 2010 V50 T5 Alloys Projector Headlamps with 5k Hid kit Quickshift kit, strut brace, Koni Yellow Sport,IPD BCS AET motorsport remap
    Previous: 2004 XC90 T6, 240GLT Estate, 343DL
    Toys: Capri 3.7 Twin turbo, Kawasaki ZX10R 2006,

  3. #3
    Junior Member
    This user has no status

    Join Date
    Apr 2019
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by deathrider311271 View Post
    Talk to these guys, they are getting some very impressive results:

    https://www.sgrperformance.com/
    Thanks for the info but they donít do the remote tuning.myself and the car are abroad.


    Sent from my iPhone using Tapatalk

  4. #4
    Senior Member
    538 Nm on the old car. Now
    that was torquing!
    Blackdog's Avatar
    Join Date
    May 2010
    Location
    Tregaron
    Posts
    913
    Thanks
    162
    Thanked 310 Times in 210 Posts
    Not sure you will be able to do remote loading on your car due to Volvos software defense systems. I think your ecu will need to be "hacked" initially to get its code to then allow flashing via the OBD port. This had to be done on my old 2012 V70 D5 to aftermarket remap it.

  5. #5
    Junior Member
    This user has no status

    Join Date
    Apr 2019
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    On this website it says they sell a self loader so it can all be done at home.


    Sent from my iPhone using Tapatalk

  6. #6
    Senior Member
    538 Nm on the old car. Now
    that was torquing!
    Blackdog's Avatar
    Join Date
    May 2010
    Location
    Tregaron
    Posts
    913
    Thanks
    162
    Thanked 310 Times in 210 Posts
    Rica agent said they could do mine until they got it... Only way they could was if it went to a Rica "workshop" first.
    All I suggest is ask before you buy.

  7. #7
    Junior Member
    This user has no status

    Join Date
    Apr 2019
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks buddy! Iím in taiwan and mapping doesnít exist here.

    All I really want is a quiet DV and a stage 1 remap. Nothing too crazy! I canít even find Dump valves online for the T5 VEA engine. Seems not many engine mods available for the newer Volvo engines compared to older Volvo turboís or other turbo cars Iíve had before.


    Sent from my iPhone using Tapatalk

  8. #8
    Senior Member
    538 Nm on the old car. Now
    that was torquing!
    Blackdog's Avatar
    Join Date
    May 2010
    Location
    Tregaron
    Posts
    913
    Thanks
    162
    Thanked 310 Times in 210 Posts
    Volvo mapping does not like DV's.

  9. #9
    Junior Member
    This user has no status

    Join Date
    Apr 2019
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Not even recirculating ?


    Sent from my iPhone using Tapatalk

  10. #10
    Trader
    This user has no status

    Join Date
    Aug 2013
    Location
    Chesham, Bucks.
    Posts
    257
    Thanks
    6
    Thanked 174 Times in 98 Posts
    The problem that you have is that progressively since 2009 Volvo have implemented a pincode system, basically plain Banditry, where they lock out all access to their product by all parties other than their dealers and those who subscribe to their systems.

    Along the way this prevents all access to the ECU through the OBD port for the purpose of changing software calibrations.and in fact to the ECU itself unless it is opened. That is what the somewhat dishonest rica entity allude to.... as do others who do not want to let the truth intrude into their world of apparent capability.

    I have contact with a Swede who often visits Taiwan to carry out with great skill the task of installing his calibrations in the later Volvos. His work will give you outputs of 270bhp with 440nm of torque.

    If you can PM me with your email address I will attempt to get him in touch with you.

    On the subject of a dump valve.... for many years now all manufacturers' software reacts badly to the presence of such devices... they are best avoided. If you really must you can remove a manufacturer's induction tract before the MAF and fit a simple cone filter that will give more induction noise. But, remember that these let past very small and abrasive particles that will, over time, cause damage to the turbo.

    Don.
    MTE performance software, Ferrita stainless exhausts, TME stainless exhausts, AP heavy duty clutch kits, KU single mass flywheels and LSDs. 01494 785508. email don@kalmar-union.com

    www.kalmar-union.com

  11. #11
    Junior Member
    This user has no status

    Join Date
    Apr 2019
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I hadnít seen any aftermarket induction kits.. I couldnít even find a k&N replacement panel filter! Just to help it breathe a bit better.. I will pm my email and see if the gentleman will be out any time soon.


    Sent from my iPhone using Tapatalk


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
ipv6 ready