Join Today
Results 1 to 7 of 7
  1. #1
    Member
    This user has no status
    uqj83l's Avatar
    Join Date
    Jan 2010
    Location
    Kent
    Posts
    68
    Thanks
    2
    Thanked 22 Times in 14 Posts

    Vibration at high speeds (and not unbalanced wheels)

    Hi
    Need a bit of advice on likely culprits. Iíve got a vibration through the steering wheel at speeds over 100mph in my 2004 V70R. (Driving on autobahns that is)
    Iíve had the wheels balanced and also swapped fronts to rears but it persists. Shocks are brand new. Tyres are Goodyear F1s.
    My thoughts lead me to a warped brake disc or worn off side axle....
    Am I looking at the right things or will it be related to ball joints or control arms? (No play though)
    Any help appreciated.....

  2. #2
    Senior Member
    Trying to keep on top of it
    LeeT5's Avatar
    Join Date
    Oct 2004
    Location
    Kent
    Posts
    5,128
    Thanks
    993
    Thanked 1,334 Times in 1,021 Posts
    1. Check the calipers are not slightly binding.
    2. Propshaft CV's.
    3. Driveshafts inners / outers excess play.
    4. Wheel alignment can also cause vibration.

    2004 V70R 6spd manual:: Custom JRtuning REMAP @ peak 21psi :: Custom 2.75" exhaust :: TTV SMF + 07 Clutch :: WG 5.0 psi :: Tints :: IPD R gauge Rev.3 :: CFWerks door pod :: Forge CBV + yellow spring :: Windowed stock housing + blue filter :: Powerflex :: Superpro Engine mount :: Brembo Dot 5.1 :: TW FMIC :: Eibach 5mm spacers :: Brembo 330mm drilled discs :: iMiV 'Classic'+ BT :: D2R XENARC 5500k + LED H7 + LED H3 :: VolvoTech CFE OBD-V1 :: See garage for full mod list

  3. The Following User Says Thank You to LeeT5 For This Useful Post:

    uqj83l (Wednesday 13th February 2019)

  4. #3
    Member
    This user has no status
    uqj83l's Avatar
    Join Date
    Jan 2010
    Location
    Kent
    Posts
    68
    Thanks
    2
    Thanked 22 Times in 14 Posts
    Thanks Lee. I’ll check all those bits this weekend and report back.

  5. #4
    Member
    This user has no status
    uqj83l's Avatar
    Join Date
    Jan 2010
    Location
    Kent
    Posts
    68
    Thanks
    2
    Thanked 22 Times in 14 Posts
    Diagnosed.

    It’s the brakes. Front Caliper pistons are seized, or the pads are seized in the front calipers.
    I pryed the pads away from the discs, went for a drive and all my vibration has vanished.

  6. The Following User Says Thank You to uqj83l For This Useful Post:

    kmb (Thursday 14th February 2019)

  7. #5
    Senior Member
    Appreciative
    kmb's Avatar
    Join Date
    Oct 2014
    Location
    Suffolk & Rhone Alpes
    Posts
    1,165
    Thanks
    701
    Thanked 402 Times in 327 Posts
    Simple way to check this is to comparatively feel the temperature of the front alloy wheels after a drive, will soon tell you if brakes are binding on.

  8. #6
    Senior Member
    Trying to keep on top of it
    LeeT5's Avatar
    Join Date
    Oct 2004
    Location
    Kent
    Posts
    5,128
    Thanks
    993
    Thanked 1,334 Times in 1,021 Posts
    Quote Originally Posted by LeeT5 View Post
    1. Check the calipers are not slightly binding.
    2. Propshaft CV's.
    3. Driveshafts inners / outers excess play.
    4. Wheel alignment can also cause vibration.
    Quote Originally Posted by uqj83l View Post
    Diagnosed.

    It’s the brakes. Front Caliper pistons are seized, or the pads are seized in the front calipers.
    I pryed the pads away from the discs, went for a drive and all my vibration has vanished.
    God I'm good

    That's another bacon roll and a coffee you owe me!

    Did you keep those calipers that I advised you to keep?

    2004 V70R 6spd manual:: Custom JRtuning REMAP @ peak 21psi :: Custom 2.75" exhaust :: TTV SMF + 07 Clutch :: WG 5.0 psi :: Tints :: IPD R gauge Rev.3 :: CFWerks door pod :: Forge CBV + yellow spring :: Windowed stock housing + blue filter :: Powerflex :: Superpro Engine mount :: Brembo Dot 5.1 :: TW FMIC :: Eibach 5mm spacers :: Brembo 330mm drilled discs :: iMiV 'Classic'+ BT :: D2R XENARC 5500k + LED H7 + LED H3 :: VolvoTech CFE OBD-V1 :: See garage for full mod list

  9. #7
    Senior Member
    Trying to keep on top of it
    LeeT5's Avatar
    Join Date
    Oct 2004
    Location
    Kent
    Posts
    5,128
    Thanks
    993
    Thanked 1,334 Times in 1,021 Posts
    Quote Originally Posted by kmb View Post
    Simple way to check this is to comparatively feel the temperature of the front alloy wheels after a drive, will soon tell you if brakes are binding on.
    I normally use a thermo probe. Highly accurate and an immediate answer! Just aim it at the disc surface and compare to the opposite side. They should be the same.

    2004 V70R 6spd manual:: Custom JRtuning REMAP @ peak 21psi :: Custom 2.75" exhaust :: TTV SMF + 07 Clutch :: WG 5.0 psi :: Tints :: IPD R gauge Rev.3 :: CFWerks door pod :: Forge CBV + yellow spring :: Windowed stock housing + blue filter :: Powerflex :: Superpro Engine mount :: Brembo Dot 5.1 :: TW FMIC :: Eibach 5mm spacers :: Brembo 330mm drilled discs :: iMiV 'Classic'+ BT :: D2R XENARC 5500k + LED H7 + LED H3 :: VolvoTech CFE OBD-V1 :: See garage for full mod list


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
ipv6 ready