Join Today
Results 1 to 2 of 2
  1. #1
    Senior Member
    Just new

    Join Date
    Feb 2013
    Location
    East Lothian Scotland
    Posts
    252
    Thanks
    16
    Thanked 20 Times in 20 Posts

    Looking for ideas and advice

    Not been on here for god knows how long now but I'm getting back on the Volvo saddle.
    A while ago the head gasket blew on my R and I'm now getting ready to get it sorted and I'm looking for some helpful advice from you lot. Basically I'm looking at doing some upgrades to the head while it's off and have been considering an uprated gasket if there is one available, better cams and port and polishing. I did put a similar post on one of the facebook forums and got some help but just thought I'd ask here.
    Many thanks in advance folk.

  2. #2
    Senior Member
    If in doubt thrash it and see
    what happens
    woz's Avatar
    Join Date
    Mar 2005
    Location
    Bristol BS5
    Posts
    624
    Thanks
    48
    Thanked 99 Times in 82 Posts
    80:20 rule is all I can say. 20% of the effort gets you 80% of the benefit. So, minor porting work, removal of flashings, a little detail work on the valve profiles and 3 angle valve seats will get you more benefit than fancy cams, polishing and "proper gas flowing" unless you have major dollars to throw around. manifold and gasket matching is worth doing as you build it all back up too!
    W


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
ipv6 ready