Sorry for the ££££e topic title!

Can anyone with a Ph2 please check if possible (or confirm if you already know conclusively).....can you read the engine coolant temperature using an OBD ELM and Torque Pro or similar diagnostic software? Reason I ask is that I'm not seeing a reading on mine on either Torque Pro or OBD Car Doctor Free. It seems like it should be available, but I just get a stable 0 reading, and no errors. I just want to establish if this indicates a problem I need to deal with, or if it's simply that these apps can't get that reading from the ECU so nothing to be concerned by.

The dash gauge is reading fine, so the ECU must be reading the sensor OK.