Would anyone know the torque settings for all the bolts on a 850 awd rear suspension sub frame ?
Or is it a case of doing them up FT ?
Would anyone know the torque settings for all the bolts on a 850 awd rear suspension sub frame ?
Or is it a case of doing them up FT ?
1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,
Here you go mate, hope I've covered everything.
![]()
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
LeeT5 (Monday 3rd July 2017)
Ummmm.....
![]()
1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,
Ft or RFt mate.
Just to be on the safe side.
(I can't see Dave's pics either)
19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...
310.2bhp / 333ft/lb
2016 Swedish Day UK "Best Modified Swede"
SOLD![]()
Got an old discovery now.
2014 V60 Polestar 6spd Auto :: Polestar map peak boost 17.4psi :: IPD 3" DP + 150cel :: Polestar 2.5" exhaust :: Paddle Shift Geartronic :: Black glass :: Maxton Splitter :: K+N Filter :: IPD Aluminium Top engine mount :: Brembo 6 pots :: 20" Polestar rims :: Brembo 371mm floating discs :: Sensus RTi + DAB + BT + WIFi :: D3S XENARC 6000k Active bending headlights
All of these Tt's (Tightening torques) are taken from a P2 V70 AWD rear wheel suspension from MY2000, but should be the same for the 850 AWD.
Basically, all M12 bolts are 80Nm +/- 20 accept for the 'Shock absorber - Upper bearing' M12 = 60Nm +/- 15.
M8 bolts are 25Nm +/- 6
M10 bolts are 50Nm +/- 12
M6 bolts are 10Nm +/- 2.5
ST4.8 bolts are 2.4Nm +/- 0.4
All measurements taken from a Volvo pocket data book.
Hope that helps!
Last edited by LeeT5; Monday 10th July 2017 at 13:25.
2014 V60 Polestar 6spd Auto :: Polestar map peak boost 17.4psi :: IPD 3" DP + 150cel :: Polestar 2.5" exhaust :: Paddle Shift Geartronic :: Black glass :: Maxton Splitter :: K+N Filter :: IPD Aluminium Top engine mount :: Brembo 6 pots :: 20" Polestar rims :: Brembo 371mm floating discs :: Sensus RTi + DAB + BT + WIFi :: D3S XENARC 6000k Active bending headlights
Oh my, it seems photobucket have changed their policy on 3rd party hosting![]()
Try these?
![]()
Last edited by Dangerous Dave; Tuesday 11th July 2017 at 12:36.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
oblark (Tuesday 11th July 2017)
Thanks Dave, I've saved the pictures this time
Would you happen to know the torque settings for the circled bolts ?
![]()
1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,
Top pic - Support arm centre bush - 80nm
bottom pic - lower control arm - both inner and outer bolts - 80nm
Make sure the suspension is compressed to it's normal height before tightening the bolts fully. Apparently the distance from the centre of the wheel to the top of the wheelarch should be 381mm
Last edited by Dangerous Dave; Wednesday 12th July 2017 at 10:25.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks