Hi guys anyone any experience of changing the rear exhaust hanger? Mine is very rusty but speaking to Volvo it seems there are a few issues...

I have the bracket made up of a bracket bolted to a plate which is bolted to the chassis looking like this

Name:  IMG_4744.PNG
Views: 0
Size:  123.3 KB

Then with the bracket bolted to it
Name:  IMG_4746.PNG
Views: 0
Size:  330.8 KB

It appears the hanger part is no longer available and so is replaced by this
Name:  IMG_4745.PNG
Views: 0
Size:  297.9 KB

From what I have read this just bolts to the chassis as one unit removing the need for the middle spacer bracket

I was wondering if anyone knew if this affects how high the exhaust is held (what with a middle bracket now missing) and does it fit with the standard mounts and rubbers? I'm pretty sure it isn't compatible with that mid bracket