Join Today
Results 1 to 4 of 4

Threaded View

  1. #1
    Senior Member
    Bored it now need to build
    it...
    Bigsi15's Avatar
    Join Date
    Aug 2015
    Location
    Bristol
    Posts
    363
    Thanks
    81
    Thanked 37 Times in 26 Posts

    Painting brake calipers

    Spent the last couple of days prepping and painting my front calipers and thought I'd share the process on here, I'm sure there are loads of these threads but may be useful to someone

    Starting to look dirty and some rust showing through. Unsurprised really as this was literally sprayed on in situs with Halfords paint but it's lasted well

    Name:  IMG_4734.JPG
Views: 0
Size:  104.1 KB

    All about the prep it seems which is what takes the time. I used a mixture of a wire brush initially and staley blade (blunt) to brush and scrape the worst of the crap and old paint off. Fortunately I had already done my calipers before so this wasn't too bad but still took a long time to do

    Half the old silver removed
    Name:  IMG_4735.JPG
Views: 0
Size:  166.1 KB

    Rest of caliper stripped
    Name:  IMG_4736.JPG
Views: 0
Size:  153.9 KB

    Unfortunately my caliper carriers were once painted in a really tough red paint which was almost impossibly to remove but most came away especially with the scraper.

    After this i used a medium grade wet and dry over the caliper then a wire wheel attachment for my cordless drill which did a great job of shifting the last bits and shining them up, then a good spray over with brake cleaner.

    Paint was a tough choice. Initially I fancied yellow but decided in the end that I couldn't handle the extra 5hp per wheel so decided on mixing metallic silver and black to make a sort of gun metal/Anthracite colour.

    Paint was hammerite straight to rust smooth. Lots of controversy on this but seems a lot of people not tracking their cars had good outcomes with the hammerite so fingers crossed.

    Paint was nice and thick unlike the yellow caliper paint so brushed on easily and only needed 1 coat really although I did 2 to be safe

    Name:  IMG_4737.JPG
Views: 0
Size:  148.5 KB

    Looks a bit better in real life on a dry day

    If I was to do this again though, All in all after the effort this took to do properly (few hours) I think I would remove it all first as it would also be neater. If I hadn't mixed my colour I would also probably spray the last coat on for a smoother finish

    Here's hoping it stays on!

    Now for the rears... (groans)
    Last edited by Bigsi15; Tuesday 16th May 2017 at 21:43.

  2. The Following 2 Users Say Thank You to Bigsi15 For This Useful Post:

    Dangerous Dave (Tuesday 16th May 2017),Yobbo (Friday 26th May 2017)


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready