Join Today
Results 1 to 5 of 5

Thread: Paint

  1. #1
    Senior Member
    This user has no status

    Join Date
    Aug 2015
    Location
    Herne Bay, Kent
    Posts
    129
    Thanks
    0
    Thanked 27 Times in 15 Posts

    Paint

    Every time I get my car washed, paint keeps coming off my front bumper.

    I've used touch up paint but doesn't stick...

    Without getting a full spray is there anything can be done? Could get bumper wrapped or cover it with a sticker.




    Sent from my iPhone using Tapatalk

  2. #2
    Senior Member
    This user has no status
    Gold 'N' Brown's Avatar
    Join Date
    May 2013
    Location
    Edinburgh
    Posts
    645
    Thanks
    11
    Thanked 249 Times in 163 Posts
    Bad respray in the past? Or maybe you've been a bit unsympathetic with the jet wash on a damaged section (stone chip etc) and it's lifted the paint.

    You could try a localised rattle can repair - rub it back and use a good quality plastic primer, base caot and clear coat. May not end up a perfect match but would look better than flaky paint. Otherwise I think the only option is full respray or try to hide it as you suggested. If you are going for a rattle can job, don't bother with stuff like Halfords off the shelf cans. Get some from a proper paint supplier (try Paints 4 U) as the cans have a better atomiser.
    2001 V70 T5 (Manual) - The Turnip
    1999 9-5 Aero (Manual) - Sven

  3. #3
    Senior Member
    The daRk knight
    LeeT5's Avatar
    Join Date
    Oct 2004
    Location
    Kent
    Posts
    4,764
    Thanks
    891
    Thanked 1,211 Times in 927 Posts
    I wouldn't bother trying to polish a turd. The bumper has obviously been sprayed in the past and not a good job.

    Don't waste your time and money trying to paint it with cans, it will look even worse and the overspray will cover the car (unless you completely wrap the car in clingfilm or plastic sheets).

    Just get it resprayed! Budget 300-400 for a good quality paint job from a reputable Body shop.

    ....and one more thing. Don't have it done by a man in a van. Total waste of money and will still cost you 250-300.

    They can sort out your badly wrapped trim parts too at the same time

    2004 V70R 6spd manual:: Custom JRtuning REMAP @ peak 21psi :: Custom 2.75" exhaust :: New KKK24 :: WG 5.5 psi :: Tints :: IPD R gauge Rev.3 :: CFWerks door pod :: Forge CBV yellow spring :: Windowed stock housing + blue filter :: Powerflex :: Superpro Engine mount :: ATE super blue :: TW FMIC :: Eibach 5mm spacers :: Brembo 330mm drilled discs :: iMiV 'Classic'+ BT :: D2R XENARC 5500k + LED H7 + LED H3 :: Atacama :: VolvoTech CFE OBD-V1 :: See garage for full mod list

  4. #4
    Senior Member
    228k and still not broke it!

    Join Date
    Jul 2011
    Location
    Poole, Dorset
    Posts
    23,071
    Thanks
    6,494
    Thanked 7,705 Times in 5,615 Posts
    The bumper can be removed and rattle-canning it is an option. Best to either learn how to do it properly or ask someone with experience to have a go.
    19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...

    310.2bhp / 333ft/lb

    2016 Swedish Day UK "Best Modified Swede"

  5. #5
    Senior Member
    This user has no status

    Join Date
    Dec 2015
    Location
    Cork, Ireland
    Posts
    376
    Thanks
    121
    Thanked 107 Times in 94 Posts
    I would go with Lee's advise, get it done by professionals. Removing the bumper takes 10 mins.
    Alternatively you can get the bumper wrapped - also by pros.


    2004 Volvo V70R GT/Titanium Gray/Gobi do88 Intake, do88 Lower Intercooler pipe, Forge CBV with green spring, 17'Pegasus, 235/45/17 Goodyear Eagle F1 AS3


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
ipv6 ready