Dyno

[kevinking2020]

I went to Amd Essex this morning and went on there dyno, to see how much power she's making.

She made 350.3Hp@5498rmp and 371.1lb-ft@3132rpm not bad for a 14 year old car with original turbo. Now I think the turbo is on it's way out. As I do have quite abit of oil in intercooler, so seals have gone or about to go. Next is to rebuild turbo or go big turbo...

Mods:

Stage 2 tune from Contrast. ( Also a big thanks from Gustav. Top bloke!)
SNABB FMIC
SNABB Intake
OEM K&N Air Filter
3" straight pipe from turbo with small silencer.
Turbosmart CBV
Oil Catch can

Video:


Printout:

[The White Knight]

I've driven a V70R with the Owen Developments hybrid k24 - it was impressive. Much less lag, and pulled hard through the rev range

[uqj83l]

I've just had my car on the dyno at AMD. It made 350/350. I've similar mods, albeit different brands.
https://www.dropbox.com/s/2lmsnoi8kr..._8941.MOV?dl=0
https://www.dropbox.com/s/k901mibt7p...%2015.jpg?dl=0

[kevinking2020]

I've just had my car on the dyno at AMD. It made 350/350. I've similar mods, albeit different brands.
https://www.dropbox.com/s/2lmsnoi8kr..._8941.MOV?dl=0
https://www.dropbox.com/s/k901mibt7p...%2015.jpg?dl=0

nice, a lot quieter than mine... They did yours in 4th gear.

also are you the one breaking an s60r on ebay? You still got all 4 doors.

[kevinking2020]

Also seeing that my turbo is on it's way out, i've brought a used k24 with a billet wheel then i'll have a spare k24 and can turn that into a hybrid.

[The White Knight]

nice, a lot quieter than mine... They did yours in 4th gear.

also are you the one breaking an s60r on ebay? You still got all 4 doors.

Yes, my good friend Bill is breaking the s60. I believe he still has all 4 doors - PM him!