Drivers Window Issue

[Blackdog]

Hi I have just acquired a 07 V70 2.4D SE Sport.

The auto function on the drivers window does not work correctly on closing. It goes all the way up and the drops back down again as of is triggering the finger sensor.

Is there a sequence that I need to do to reset the close cycle?

It works fine in manual mode.

Thanks in advance.

[The Flying Moose]

I had the exact same issue with my 54 plate. It needed plugging into vidas and reprogrammed to make the window "learn". Where the top is.

[Yosser]

I've never had this problem, but I believe it can be reset without vida;

http://forums.swedespeed.com/showthr...ow-calibration

[Blackdog]

Thanks for the link Yosser.

Pulled the fuse during the auto cycle. Ignition off. Fuse refitted. And all is working as it should.

[Ettienne]

I did the fuse way on the xc90 worked perfectly