Join Today
Page 1 of 2 12 LastLast
Results 1 to 20 of 38

Thread: Project 254

  1. #1
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts

    Project 254

    As 240 turbo's using the 940 lpt red block engines are get as common as muck I think it's time to take the 240 to the next level ........ T5 it

    With the help from Steve we went and picked up a OBD1 850 T5 engine with 118k miles.

    The first thing I found was the turbo is well passed it's best, but the rest of the engine is Ok it looks like it's had the PCV changed and a service not many miles ago.

    The first thing to do is to remove all the bits that are not needed.




    Then bolt on all the bits that are needed.




    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  2. The Following 8 Users Say Thank You to oblark For This Useful Post:

    Biff (Monday 21st December 2015),claymore (Sunday 20th December 2015),craigoodwood (Monday 21st December 2015),Jamest5r (Sunday 20th December 2015),jimka (Sunday 20th December 2015),martybelfastt5 (Wednesday 23rd December 2015),Nealevo (Sunday 20th December 2015),Ric@rdo (Monday 21st December 2015)

  3. #2
    Senior Member
    VPCUK reigning car of the year
    Nealevo's Avatar
    Join Date
    Apr 2011
    Location
    Home for now.
    Posts
    3,867
    Thanks
    2,157
    Thanked 2,777 Times in 1,607 Posts
    Looking good Rob, don't suppose you got the gearbox with that engine??

  4. #3
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by Nealevo View Post
    Looking good Rob, don't suppose you got the gearbox with that engine??
    When we turned up the engine and gearbox was still on the sub frame,

    As it would fit in the back of Steve's car we had to break it down to just the engine.

    I'll pm you his phone number but he won't post anything.

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  5. The Following User Says Thank You to oblark For This Useful Post:

    Nealevo (Sunday 20th December 2015)

  6. #4
    New Identity
    Back in an AWD....Oh the grip!
    Dangerous Dave's Avatar
    Join Date
    Dec 2006
    Location
    West Midlands
    Posts
    8,921
    Thanks
    2,491
    Thanked 2,582 Times in 2,051 Posts
    Nice

    You going to run a custom sump or fit a modified 960 one?
    1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
    1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
    2004 Sapphire Black S60 D5 - The new daily hack.

  7. #5
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by Dangerous Dave View Post
    Nice

    You going to run a custom sump or fit a modified 960 one?
    A modified 960 sump

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  8. #6
    New Identity
    Back in an AWD....Oh the grip!
    Dangerous Dave's Avatar
    Join Date
    Dec 2006
    Location
    West Midlands
    Posts
    8,921
    Thanks
    2,491
    Thanked 2,582 Times in 2,051 Posts
    Sweeeeet!

    Looking forward to future updates
    1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
    1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
    2004 Sapphire Black S60 D5 - The new daily hack.

  9. #7
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Picked this up from the profilers this afternoon before they closed for Christmas.


    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  10. The Following 2 Users Say Thank You to oblark For This Useful Post:

    craigoodwood (Friday 25th December 2015),Jamest5r (Wednesday 23rd December 2015)

  11. #8
    New Identity
    Back in an AWD....Oh the grip!
    Dangerous Dave's Avatar
    Join Date
    Dec 2006
    Location
    West Midlands
    Posts
    8,921
    Thanks
    2,491
    Thanked 2,582 Times in 2,051 Posts
    Quote Originally Posted by oblark View Post
    Picked this up from the profilers this afternoon before they closed for Christmas.

    Gearbox adapter?

    What you going to be running?
    1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
    1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
    2004 Sapphire Black S60 D5 - The new daily hack.

  12. #9
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by Dangerous Dave View Post
    Gearbox adapter?

    What you going to be running?
    It's a gearbox adaptor so I can use the red block M90 gearbox.

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  13. The Following User Says Thank You to oblark For This Useful Post:

    Dangerous Dave (Friday 25th December 2015)

  14. #10
    New Identity
    Back in an AWD....Oh the grip!
    Dangerous Dave's Avatar
    Join Date
    Dec 2006
    Location
    West Midlands
    Posts
    8,921
    Thanks
    2,491
    Thanked 2,582 Times in 2,051 Posts
    Ah yes, I do like the smoothness of the M90 (well compared to the M47)
    1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
    1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
    2004 Sapphire Black S60 D5 - The new daily hack.

  15. #11
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Started to countersink the holes in the adaptor plate so it can be bolted to the engine, Did all but 4 as my countersinking bit has now passed it's best so I'll order a new one in the new year.

    Did a trail fit of the red block bell housing and all looks ok.


    Last edited by oblark; Saturday 26th December 2015 at 17:56.

    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  16. #12
    Senior Member
    Overall VPCUK car of the year
    2015
    craigoodwood's Avatar
    Join Date
    Feb 2012
    Location
    lawley village, TELFORD
    Posts
    1,295
    Thanks
    2,312
    Thanked 511 Times in 367 Posts
    i dont suppose you got the profile drawing with it too??

  17. #13
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Quote Originally Posted by craigoodwood View Post
    i dont suppose you got the profile drawing with it too??
    I gave the profilers the bell housing and they used that to cut the adaptor plate.

    The gearbox adaptor plate is finished.




    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  18. The Following User Says Thank You to oblark For This Useful Post:

    craigoodwood (Monday 28th December 2015)

  19. #14
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Made a new turbo oil return pipe as the turbo has been "clocked" and the 850 wont fit anymore.

    The new pipe was made from a 940 lpt and a 850 oil pipe.






    The down pipe looks like it could be fun.


    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  20. The Following 2 Users Say Thank You to oblark For This Useful Post:

    craigoodwood (Sunday 3rd January 2016),Shinsplintz 101 (Sunday 3rd January 2016)

  21. #15
    Dare to be Different
    vinny is getting a
    revamp....be back soon
    t5steve's Avatar
    Join Date
    Jun 2011
    Location
    laindon, essex
    Posts
    1,457
    Thanks
    427
    Thanked 636 Times in 479 Posts
    looking good rob
    "dare to be different"

  22. #16
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    This little beauty arrived in the post today


    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  23. #17
    Junior Member
    This user has no status

    Join Date
    Dec 2015
    Posts
    18
    Thanks
    0
    Thanked 3 Times in 3 Posts
    The intercooler you posted a photo of, may I ask if the tubes have internal turbulators, (internal finning)? Or are the tubes "empty"? Thanks.

  24. #18
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    Some major parts arrived from classic swede during the week so today I was out in the man cave cutting down the sump from a 6 cylinder to a 5 cylinder. Also the oil pick up tube modified to fit.








    Already to be welded.



    On the engine mount front, the inlet side only has 3 out of 4 bolt holes that line up. But the exhaust side only has 2 out of 4 bolt holes that line up so I'll be fabricating so new engine mounts out some steel plate.



    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  25. The Following 2 Users Say Thank You to oblark For This Useful Post:

    craigoodwood (Sunday 17th January 2016),MoleT-5R (Sunday 17th January 2016)

  26. #19
    Ghost Rider
    If I want your opinion, I'll
    ask you to fill out the
    necessary forms
    oblark's Avatar
    Join Date
    Jul 2005
    Location
    Romsey, Hampshire
    Posts
    4,481
    Thanks
    982
    Thanked 1,921 Times in 1,186 Posts
    I purchased the CAD file of lower engine mounts from Homer and had them manufactured from 5mm steel. I wasn't happy with how the upper engine mounts sat so I manufactured them from also 5mm steel. I used a CAD (card aided design) to make the mounts.





    Picked the sump and the oil filter bracket from the machine shop this morning.

    The sump had to be skimmed as it bent when it was welded. With the aid of some Volvo chemical gasket the sump was fitted and the oil filter bracket was screwed into the sump.







    1996 850 T5 AWD - Self tuned M4.4 ECU with COP`s, B5254T ( S60R internals in a 850 block ) ostrich 2.0 , VXR injectors @ 3.8 bar, K24 turbo with a 6+6 compressor wheel, 3.25" MAF, top mounted Dump Valve, RN Exhaust manifold, 3" downpipe with 200 cell cat, 2.75" Stainless exhaust, Brembo calipers, S60R brake discs, stainless RIP kit, 3" Throttle body,

  27. The Following 3 Users Say Thank You to oblark For This Useful Post:

    craigoodwood (Sunday 31st January 2016),kmb (Sunday 31st January 2016),Shinsplintz 101 (Sunday 31st January 2016)

  28. #20
    Senior Member
    Appreciative
    kmb's Avatar
    Join Date
    Oct 2014
    Location
    Suffolk & Rhone Alpes
    Posts
    1,396
    Thanks
    926
    Thanked 455 Times in 375 Posts
    Lol at the card aided design - Thanks for the updates Rob!


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready