Hi been Trying to renovera the ABS module with an e5 Torx bit but it seems not to fot, a bit on the small size to be honest. Has anyone experimentet this or do i need an e 5.5 bit?
Ta
Dan
Hi been Trying to renovera the ABS module with an e5 Torx bit but it seems not to fot, a bit on the small size to be honest. Has anyone experimentet this or do i need an e 5.5 bit?
Ta
Dan
Thread below says you can use a 4 mm socket but be careful if you try it!!
http://www.volvoforums.org.uk/showthread.php?t=173546
Proper one looks like http://www.ultimategarage.com/shop/p...oducts_id=5169
Dannyboy7 (Wednesday 11th November 2015)
Used an E5 on the old S70, no problems at all.
Dannyboy7 (Thursday 12th November 2015)
E5 unless the previous owner has butchered it using the wrong size socket.
Dannyboy7 (Thursday 12th November 2015)
Hi guys thanks, no it was from my brother only two owners it hasn't been off ill try again.
Thanks for the replies.
Dan
I have spare bolts if you round the off.
Volvo ABS ECU Repair
Join my projecteers tribe - Old Volvos Never Die - They just get faster.
Visit my VPCUK garage and my YouTube channel - WobblyDave72
Dannyboy7 (Thursday 12th November 2015)
Hi guys thanks for posts I have a new e5 bit with which I will attempt the extraction later. Just out of interest if I go down the repair route and send it off to someone rough price and do they test it first against a known true result to save taking it apart?
Dan
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks