mamba?kiniguwa actuators

[Biff]

Me? Was intercooler, 3" rip, 3" dp, cat back, Japanifold, decat, blues, forged rods, lightly ported head, induction kit, 3" intake, 4.4 ecu. I have the same now but with gt30 turbo and gt500 injectors with remap, got 360bhp 380 ft lbs @ 1.2 bar unfortunately engine has low compression, so off the road doing the rings over winter...

I'm going to bed dreaming of that tonight.

[MoleT-5R]

Me? Was intercooler, 3" rip, 3" dp, cat back, Japanifold, decat, blues, forged rods, lightly ported head, induction kit, 3" intake, 4.4 ecu. I have the same now but with gt30 turbo and gt500 injectors with remap, got 360bhp 380 ft lbs @ 1.2 bar unfortunately engine has low compression, so off the road doing the rings over winter...

Those are some very good results and that does make me very keen to get mine onto the rolling road to see what it can do, as I have fitted most of those items you mention, but currently sticking with the 15g for a short while longer, hope to change mid 2016, but to what I'm not sure yet.

[mike 850]

If you have time to burn, my project thread with different variations

https://www.facebook.com/media/set/?...1&l=2c1d0d81d1

360 was with the chinky gt30, don't think I'd ever of got that with the 19t, couldn't get it above 320 tbh, more boost gave more torque but just wouldn't flow up top

Sorry for the thread hijack

[MoleT-5R]

If you have time to burn, my project thread with different variations

https://www.facebook.com/media/set/?...1&l=2c1d0d81d1

360 was with the chinky gt30, don't think I'd ever of got that with the 19t, couldn't get it above 320 tbh, more boost gave more torque but just wouldn't flow up top

Sorry for the thread hijack

turbos actuators all similar stuff so don't see we're far of topic...lol, but I will have a look at your project thread, not something I'd normally associate with fb tbh

[mike 850]

It was just somewhere to upload photos to start with. I did use a kinugawa adjustable actuator and it worked really well