Let's play guess the problem

[martin_r_smith]

Unfortunately the tdi has taken a turn for the worse and a potentially life ending (the cars) situation has occurred. I'm really quite upset about it all because of the effort I've put into this car, but, if I don't try and laugh about it I'll probably cry!

So here's a little vid...... If someone can guess the problem they win a fictional curly wurly! Have a listen and see what you think.

[t5 pete]

There's a little man In your exhaust with a hammer bloody little things they are

[martin_r_smith]

No curly wurly for pete! But i would happily take the little man hammering over what actually happened

[Blackdog]

Sounds like you have bent something in the front.

[martin_r_smith]

It is at the front

[Blackdog]

TBH it sounds like one of those single pot stationary engines you see at steam rallies.

So I would guess at loss of compression on one cylinder.

[Doingitsideways]

Pretty serious misfire there.

The regularity of it says no firing at all on at least one, if not two cylinders.

Mega HGF?

Have you compression tested it?

[martin_r_smith]

Well Blackdog and Mr sideways are close enough.

It was blown gasket between cylinders 3&4. It really did sound like a steam engine too!

Here is the offending item

[The Flying Moose]

Oh nothing beyond you then Martin, couple of hours work

[jamesy12345]

Sounded like my 480 just recently

[Doingitsideways]

Oh nothing beyond you then Martin, couple of hours work

That's right, you've already done the hard bit in stripping it down!
Didn't you recently change the HG though?

Sounded like my 480 just recently

You still got that engine or did it go with the 440?

[jamesy12345]

That's right, you've already done the hard bit in stripping it down!
Didn't you recently change the HG though?



You still got that engine or did it go with the 440?

Still there mate although not for long, what do you need?

[Doingitsideways]

Forgot all about it until now.

I was gonna take the whole engine, Fella. Or at least the head and auto 'box.

[jamesy12345]

Forgot all about it until now.

I was gonna take the whole engine, Fella. Or at least the head and auto 'box.

the garage is relocating mate so they are clearing out, it's still there right now though & would be nice to put it to some use...any ideas on how to get it to you??

(sorry martin!)

[Doingitsideways]

Moving to PMs.

Sorry, Martin. Can't be derailing threads now...

[martin_r_smith]

That's right, you've already done the hard bit in stripping it down!
Didn't you recently change the HG though?

I did brand new head and gasket obviously, but we think an inferior quality gasket may be the issue as all of the gaps between cylinders were starting to leak.

[PNuT]

mine sounded like that when I had an issue.... two loose head bolts!!

I have a few spare parts for one of these cars if you need anything