Volvo 850 intercooler

**Ettienne** · Thursday 5th March 2015, 18:30

With the klracing group buy does anyone know the maximum width for the 850 retaining the air con?

Is it 40, 50 or 60mm

**stribo** · Thursday 5th March 2015, 18:33

Whatever the do88 one is. I can measure it if needs be.

**Ettienne** · Thursday 5th March 2015, 18:44

Originally Posted by stribo

Whatever the do88 one is. I can measure it if needs be.

I did look on pfv but didn't give a size I think they 30mm standard, but yes please measure.

**stribo** · Thursday 5th March 2015, 20:02

Mine is 50mm, but I did need to trim the front crossmember a bit to get the aircon rad to fit:

**martin_r_smith** · Thursday 5th March 2015, 20:51

Mines 75mm and nothing else is going to fit lol.

**oblark** · Thursday 5th March 2015, 21:01

My do88 intercooler is 50mm, I think Nealevo is the one to talk to

**stribo** · Thursday 5th March 2015, 21:06

Originally Posted by oblark

My do88 intercooler is 50mm, I think Nealevo is the one to talk to

Why, did I not give the right information?

**Nealevo** · Thursday 5th March 2015, 21:14

Mine it 50mm too, and I retained my air con rad with the slightest of fettling, but it was close

**t5 pete** · Thursday 5th March 2015, 21:25

Mine is also a 50mm one that I fitted but I didn't want to either push the rad back or notch the front brace so didn't use the air con rad but left pipe work there if I decide to install it.
Personally got for the 40mm one

JT · Thursday 5th March 2015, 21:47

poor pics but.........

50mm inc AC:

60mm without:

in both cases, you can see the panel holding the relays has moved back, but I think if you want to use a 60mm,you will need some brackets to move the rad rearwards, if you want to keep the AC