S60 front lips

**Tomcat** · Thursday 6th November 2014, 14:02

I'm considering making an S60 Front lip but I need a few answers fist. Are the ph 1 and 2 S60's the same shape bumper underneath?.. (ie.. if I make on for a ph1 will it fit a ph2) and what's the chances of them also fitting the V70's?.. Also, is there any interest in me making these before I start?.. If there is then what do you want them to look like?..

**Dream3r** · Thursday 6th November 2014, 14:13

I might be tempted if you could make on like Chris's??

**Tomcat** · Thursday 6th November 2014, 14:14

Chris's??

**stribo** · Thursday 6th November 2014, 14:59

Originally Posted by Tomcat

Chris's??

The same as Stephen Evans, I'd be interested in one of them too.

**M-R-P** · Thursday 6th November 2014, 15:17

The early V70's bumper slopes inward making it very difficult to make a splitter for it. I fitted my splitter to the seam between the painted and black bit. It may be easier to make one that screws to the front of the bumper, rather than to the underside. And the profile is different for the facelift.

**Dream3r** · Thursday 6th November 2014, 15:25

Originally Posted by stribo

The same as Stephen Evans, I'd be interested in one of them too.

That's it Chris S70T5 S60R front lip jobby.

**S70T5Chris** · Thursday 6th November 2014, 15:41

**Dream3r** · Thursday 6th November 2014, 15:56

Lovely

**Tomcat** · Thursday 6th November 2014, 16:14

Not sure how easy it'd be to make that for ph1 cars, however...

**S70T5Chris** · Thursday 6th November 2014, 16:19

Yeah that is specifically to fit the R bumper (which is the same for facelift and pre).

The sport front lip to fit the facelift P2's are quite nice.

**Dream3r** · Thursday 6th November 2014, 16:29

Originally Posted by S70T5Chris

Yeah that is specifically to fit the R bumper (which is the same for facelift and pre).

The sport front lip to fit the facelift P2's are quite nice.

As GWE about his and a trailer

**Tomcat** · Thursday 6th November 2014, 16:29

So what's the verdict? Do I make them just for R's or for standard only cars?

**stribo** · Thursday 6th November 2014, 17:06

Well, as you've had interest from 2 R owners already, I'd say the R, plus it'll fit all P2Rs.

**Ettienne** · Thursday 6th November 2014, 17:15

I'd be interested in 1 or 2 p2r spoilers

**Ettienne** · Thursday 6th November 2014, 17:15

Might be 3 as a friend may want one, plus another non r

**Harvey** · Thursday 6th November 2014, 19:31

Must say I do like the smaller ones like this set up or the likes.

http://forums.swedespeed.com/showthr...the-VR%85Kinda

**Markyb** · Sunday 9th November 2014, 13:22

Would be interested in this for an 2003 R too if it came about, very nice

**Tomcat** · Sunday 9th November 2014, 13:46

Ok, my only problem with this is I'd need to get hold of an R front bumper to get the shape right. The only S60 front I have at the minute is a standard one. If I have to buy one it's going to cost around £2-300, I dont object to this as I have to speculate to accumulate as the saying goes. But I would need to be sure there where orders there for when I'd finished it.