Water/methanol injection kits anyone running them on here is it good for engines or bad would u get more torque/bhp figures wot kits are good etc etc
Water/methanol injection kits anyone running them on here is it good for engines or bad would u get more torque/bhp figures wot kits are good etc etc
"WOODY T5 fastest volvo 850 since 2011/12/13/14 @ avon and york 13.3 112mph
854 t5 19t gripper mte bc loads more 311.6 whp 373 foot pound 342 @ clucth
toy cbr954
There a fair few on t5d5 running it with really good results it will help stop knock and able you to run better boost I will be fitting it to the gul
WOODY T5 (Friday 5th September 2014)
Stewart, (external error) is running one, we had a good chat about it at Retro Rides.
WOODY T5 (Friday 5th September 2014)
Woody ups his gain for 2015. Lol
Anything that brings down the temperature & increases the density of the bang is good in my book.
missing being Swedish
Previously:
03 S40 Sport Lux 1.9d SOLD
1998 MTE Stage 2 V70 T5 Manual SOLD
1998 V70R AWD Manual BROKEN
p fandango (Friday 5th September 2014)
MoleT-5R (Tuesday 23rd September 2014)
Looks like its money well spent then
"WOODY T5 fastest volvo 850 since 2011/12/13/14 @ avon and york 13.3 112mph
854 t5 19t gripper mte bc loads more 311.6 whp 373 foot pound 342 @ clucth
toy cbr954
Nos for the both of you!
missing being Swedish
Previously:
03 S40 Sport Lux 1.9d SOLD
1998 MTE Stage 2 V70 T5 Manual SOLD
1998 V70R AWD Manual BROKEN
Make the most of that crown mate, I'm coming for it
PIC][/SIGPIC]
aaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa
Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread
Not with your wobbly knees I hope tho then u might have a chance
"WOODY T5 fastest volvo 850 since 2011/12/13/14 @ avon and york 13.3 112mph
854 t5 19t gripper mte bc loads more 311.6 whp 373 foot pound 342 @ clucth
toy cbr954
I actuall think a crown would be a good idea or a tiara for the wimps amongst us that have to ask their wife's
stribo (Friday 5th September 2014)
Jamest5r (Friday 5th September 2014)
The tiara will come in handy then the the girls and the girly boys
Anyway have brought one of these water meth kits after reading like poeple say cools temps down witch must put less wear on things if I get more bhp + torque then happy days
Last edited by WOODY T5; Friday 5th September 2014 at 22:35.
"WOODY T5 fastest volvo 850 since 2011/12/13/14 @ avon and york 13.3 112mph
854 t5 19t gripper mte bc loads more 311.6 whp 373 foot pound 342 @ clucth
toy cbr954
You get a double effect with the water/meth 1st your intake temps are lower as the air is cooled by the meth and the cooler the air means the more it can be compressed which means the more oxygen per sq/in meaning an increase in power, in the process of the meth cooling the air it evaporates into the air stream basically adding a shot of methanol to the air fuel mixture working like redex upping the octane of the fuel again giving a slight increase in power. in terms of power difference it will be like running on a tank of 108 octane fuel on a cold morning. The downsides are that methanol is slightly corrosive but when mixed with about 20% water should be fine. If you opt for a 100% mixture on some occasions ensure you flush your system out by running a higher concentration of water for the next few top ups to dilute any methanol residue in the system. From what I've read in high concentrations it can cause rubber/silicone pipework to go brittle over extended periods of time so keep an eye on the systems piping.
Well me is pleased to say the aem v2 meth kit works very well
"WOODY T5 fastest volvo 850 since 2011/12/13/14 @ avon and york 13.3 112mph
854 t5 19t gripper mte bc loads more 311.6 whp 373 foot pound 342 @ clucth
toy cbr954
MoleT-5R (Tuesday 23rd September 2014)
Did you run with it at york?
T35, 556Nm/410lbft & 361BHP/317WHP
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks