rolling road today :-)

[caseyt5]

Well had mine rolling roaded today didn't expect that much bhp and definitely didn't expect 376ftlb of torque.

Overall came out at 301.2hp

First run made 307hp
Second run made 299.1hp
The first run was with the ebc set at 16psi
The second run was with an mbc running more boost but misfired. Probably caused by the afr's.

Thats on a hlm 304 map with a 16t running blue injectors at the moment.

3" throttle body n/a cams, rip kit, forged conrods, decat and a homemade exhaust.

getting a 19t next week so will fit and rolling road on the same dyno at the same boost and see the difference.

I cant post a pic from my phone but anyone who has me on facebook please feel free to upload for me .

[merc85]

Well done buddy, thats certainly nice power

[oblark]

Thats some good power

Was it dynoed at the Gosport dyno ?

[Wobbly Dave]

Just out of curiousity which RR was it?

Good results mind - if you get yourself a photobucket or dropbox account - it makes it easy to share from your phone,

[caseyt5]

Thanks mate, didnt expect that much to be honest I thought around 260/270bhp and thought thr torque would match. :-) atleast its a starting point for more mods.

[caseyt5]

It was devil development in Littlehampton and it was a dyno dynamics rolling road. :-)

[stribo]

I told you it was more than 260bhp Good figures mate.

[caseyt5]

It just didn't seem that much and after alot of RRs with a 16t and 304 id seen on here most only make around 260/270 so kept my eyes on that sort of figure :-)

[AndysR]

Good power, no wonder it turned the times on the 1/4 that it did!

[caseyt5]

Thanks Andy :-)

[graemewelch]

good results there, just been talking to your mate mike batesman

[caseyt5]

Thanks mate, yes I still want an intake but can't open pms on my phone and couldn't remember who I spoke to. Gonna try and put an order in of 3 at a time :-)

[Wobbly Dave]

Here's your graph taken from FB

[smithy]

I know I'm going to get slated for this but what was the whp please .good results by the way and good torque too

[caseyt5]

Thanks mate

[caseyt5]

I think it was around 250

[V70 Graham]

Nice figures, you must be pleased.

[stribo]

I know I'm going to get slated for this but what was the whp please .good results by the way and good torque too

Stop asking stupid questions, slating over.

[T5frankie]

Massive torque for a 16t mate

[caseyt5]

It has alot of room for improvement, it hunts on idle but can't find an air leak. It does pull effortlessly im hoping the 19t will improve the power later in the rpm