turbo intake size?

[T5frankie]

can anyone tell me the exact size hose ill need to fit onto the intake side of my 19t? thanks

[MoleT-5R]

can anyone tell me the exact size hose ill need to fit onto the intake side of my 19t? thanks

I would, but it's peeing down with rain to be ripping Jayne's car apart mate

[T5frankie]

I would, but it's peeing down with rain to be ripping Jayne's car apart mate

helpful mate, it would be the same as any td04 mate lol

[MoleT-5R]

helpful mate, it would be the same as any td04 mate lol

I want to measure the T5's one as I'm thinking of modding it from filter to turbo, but the weather is s£££e and the garage is full of 2.0l v70 at present, so my have to wait a day or so, but it will have to come in during this week as I've got to change the turbo oil feed pipe which has cracked

[artfulflounder]

I believe 15g,16t and 19s had same size from compressor.

[MoleT-5R]

I believe 15g,16t and 19s had same size from compressor.

aye, frankie has said that all the td04's were the same, just don't no what it is

[T5frankie]

i just need to know what size hose to buy 50mm? 60mm?

[960kg]

60mm internal hose

[T5frankie]

60mm internal hose

is that a fact keith?

[960kg]

Yes, i am sitting looking at my old 16T on the table and also my 3" intake pipe i have made but not yet fitted...........60mm external Turbo inlet side so 60mm internal hose

[T5frankie]

Yes, i am sitting looking at my old 16T on the table and also my 3" intake pipe i have made but not yet fitted...........60mm external Turbo inlet side so 60mm internal hose

thanks alot mate, i'm building my own too

[960kg]

Excuse the string Lol.......it is holding the lot up while i took a pic.



..........................................

[MoleT-5R]

thanks alot mate, i'm building my own too

me too, well got to finish off the intake system before the season starts

[T5frankie]

Excuse the string Lol.......it is holding the lot up while i took a pic.



..........................................

keith that brass inlet piece, how is it fitted? has it got a self tapping other side? did you just drill a hole and screw it in?

[Wobbly Dave]

I have the inlet pipe work from my 19T which you are welcome to have. It includes a D-shaped hole for the PTC grommet.

[MoleT-5R]

keith that brass inlet piece, how is it fitted? has it got a self tapping other side? did you just drill a hole and screw it in?

most probably a nut on the underside

[T5frankie]

mine didn't have that extra inlet so ive drilled a hole for the ptc in some 3" pipe i had, fits nice so would a 45 or 90 degree silicone reducer be best?

[p fandango]

i'm sure it does go 60mm on the turbo, 70mm on the MAF then i've gone upto 76mm into the cone filter/bypass valve. I've used a shallower 45degree on the turbo

[T5frankie]

i'm sure it does go 60mm on the turbo, 70mm on the MAF then i've gone upto 76mm into the cone filter/bypass valve. I've used a shallower 45degree on the turbo

im having 60mm off the turbo into 3" all the way up to the air filter

[p fandango]

im having 60mm off the turbo into 3" all the way up to the air filter

I've already got a 3" maf, but only going to be running a standard(ish) ecu so trying to keep it relatively standard so it doesn't try confused