just took delivery of a spare head that im going to strip port and polish but i want to make sure i buy a valve spring compressor that will work with the t5 head. any link to what you have used on a t5 head would be great
just took delivery of a spare head that im going to strip port and polish but i want to make sure i buy a valve spring compressor that will work with the t5 head. any link to what you have used on a t5 head would be great
s60 2.4 t5 eibach springs,up rated rear anti roll bar, poly bushed wishbones, poly lower engine mount, fmic, bmc air filter, 3" decat, 2.5" stainless exhaust,hlm remap 328bhp,
A Normal Valve spring compressor with a suitible sized Socket (cant rember the exact size lol) cut down the side with a angle grinder, lol bit pikey but it worked lmfao
I got a Sealey deep valve spring compressor for mine. Managed to pick one up cheap.
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
Covered before - one from Halfords will be fine.
http://www.vpcuk.org/forums/showthre...sor&highlight=
Current Garage:
1997 960 3.0L 24v - Polestar...(Honest guv..!!)
1997 855 T5 S - stripped to 1300kgs gross weight - 14.2sec qtr(rank 17*)
2001 V40 T4 SE - 14.199@100.15MPH - Hybrid Turbo/VXR injectors and DeCat(Rank 15*)
*Data Sept 2013
Any Stuff For Sale - check out my Ebay link
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks