98 C70 Error codes

[Brett855tdi]

Hi peeps looking for some wisdom from the gurus here.

recently fitted a new 19t over the standard 16t... for a whole day it was fine.

then i find the upper pcv pipe to the top of the valve had shrank, so i added a piece in an fixed it then cleaned my air filter.
after starting the car to warm up it was still fine for 10 mins then cut out.
i went and fired it back up and it was running mega rich and struggling to idle.
after unplugging the maf it was ok.
so i did a scan and got;
p0102 maf circuit low input
p0171 system too lean b1
p0505 idle control valve
p0243 wastegate solenoid A

so this morning i fiited new maf.
care starts idles fine maybe a little high sat at 1100rpm
however if i put my foot down it leans off specially with boost.

now i get codes
p0171 and p0505 only.

im confused as it should be ok now

[T5frankie]

Same as mine, hardly any power when you need it po 171 pain in the arse code

[stribo]

Have you checked all the vac pipes Brett.?

[Brett855tdi]

Same as mine, hardly any power when you need it po 171 pain in the arse code

yea as i said yesterday... cant find the thread now but thought we have the same issue.
ive cleared it maybe 10 times now.... have u had any luck with yours?

[Brett855tdi]

Have you checked all the vac pipes Brett.?

yeah double checked the lot

[T5frankie]

yea as i said yesterday... cant find the thread now but thought we have the same issue.
ive cleared it maybe 10 times now.... have u had any luck with yours?

Not yet mate, gonna try yet another maf then lambda

[Brett855tdi]

Not yet mate, gonna try yet another maf then lambda

i put a brand new maf on mine.... and the lambda seems fine.

i dont have a second lambda as i chopped it out with the cat... buts its been fine for over a year like that

picklin me, i just want to get that 19t spinning

[960kg]

i put a brand new maf on mine.... and the lambda seems fine.

i dont have a second lambda as i chopped it out with the cat... buts its been fine for over a year like that

picklin me, i just want to get that 19t spinning

..........................................

Is your New MAF a VOLVO NEW MAF??

I have just put up the pics. instead of all the gossip i did on Frankies thread!!

Sometimes owners get away with a copy MAF but not always!

...........................................

[Brett855tdi]

so your saying you think its the cheap maf?

ive just cleared codes and gone for a spin... still getting po171 and no real power.
trying to upload a vid... but its taking too long

[Brett855tdi]

foot to the floor... (not on public roads)

[960kg]

so your saying you think its the cheap maf?

ive just cleared codes and gone for a spin... still getting po171 and no real power.
trying to upload a vid... but its taking too long

I am not a Guru by any chance of the imagination .......i just work on logic or facts!

I have seen countless threads on this code and they all end up with a new Volvo MAF problem solved.

I don`t blame most owners for not buying genuine as some parts are expensive...but if you cherish your motor and the bhp it gives with such enjoyment, then why not give the motor what it is suffering from!

Cars have been my hobby all my life so far and when it comes to a part gone tits up i give it the best....pay once ...fit once...fit Volvo...whatever and forget.

Yes, i know expensive, but even more expensive to buy a copy and it doesn`t work.

[960kg]

What new MAF have you fitted and how much?

[Brett855tdi]

What new MAF have you fitted and how much?

was a copy unit from gsf.... £60

[960kg]

was a copy unit from gsf.... £60

Soooooooo...it`s over to you!

Having spent only £60... what do you think??

If it were me i would try to get a refund and put that money towards the Volvo MAF........having said that have you checked with a meter the ohm`s for the MAF as in the pics. and also what do you think of the others things in the list?

[960kg]

I always seem to get into rows with owners because i speak as i see it.

Owners will spend hundreds on an exhaust system or RIP pipe but nothing on the MAF which is really where it all starts from, measuring the air volume.

Your only as strong as your weakness link!........some buy cheap O2 sensors and get away without a light up but how much have they exactly got away with?...could you have more performance or more mpg with the proper Volvo sensor?

The same with plugs, owners buy Bosch or NGK... that is ok if tuned to more than 75bhp over stock but in reality it is the Volvo plug that gives the best.

I have been there and learnt whatever and only try to save others the trap of aftermarket parts, they clap there hands when you pay, ok ,so Volvo may be more expensive but at least you have the support of the dealership to fall back on, but with there parts you should not ever need it.

[T5frankie]

I always seem to get into rows with owners because i speak as i see it.

Owners will spend hundreds on an exhaust system or RIP pipe but nothing on the MAF which is really where it all starts from, measuring the air volume.

Your only as strong as your weakness link!........some buy cheap O2 sensors and get away without a light up but how much have they exactly got away with?...could you have more performance or more mpg with the proper Volvo sensor?

The same with plugs, owners buy Bosch or NGK... that is ok if tuned to more than 75bhp over stock but in reality it is the Volvo plug that gives the best.

I have been there and learnt whatever and only try to save others the trap of aftermarket parts, they clap there hands when you pay, ok ,so Volvo may be more expensive but at least you have the support of the dealership to fall back on, but with there parts you should not ever need it.

aint volvo plugs bosch then?

[Brett855tdi]

I'm gunna have to waiting until monday afternoon for a Bosch one

[T5frankie]

I'm gunna have to waiting until monday afternoon for a Bosch one

what price did you gat a bosch one for?

[960kg]

aint volvo plugs bosch then?

Yes, NGK used to make the Volvo plugs but now it is Bosch and they even have the Bosch emblem pressed into the shiny metal collar BUT the Volvo specified plug cannot be sold as a Bosch plug because of copyright...it is illegal to do so......so ok, you buy a Bosch plug for your Volvo but it is not to the exact heatrange or specification given by Volvo so therefore it is the nearest and not the recommended sparking plug.

This is an ongoing saga on these forums but the proof of the pudding is in the eating!

Yes, a Bosch plug or NGK will work ok , but give them 8000mls and a misfire will happen at 4 to 45000revs on WOT and it will be 100% the plugs....they fail under pressure at those revs.

So seeing as Volvo plugs are comparable in price now why not fit the proper plug for the motor in the first place....otherwise what happens is when you get a misfire the owner will think he has new plugs so it cannot be that so he spends and spends on other parts for it only to be his not recommended plug........if you chuck out 75 or more bhp from standard then that is another matter as one should go one different from the specified heat range!

[Brett855tdi]

what price did you gat a bosch one for?

gsf £130

i went to my local volvo stealers.... only £238 + Vat :/