Join Today
Page 1 of 4 123 ... LastLast
Results 1 to 20 of 63
  1. #1
    Member
    This user has no status
    koperbart's Avatar
    Join Date
    Nov 2013
    Location
    Worcester
    Posts
    57
    Thanks
    15
    Thanked 10 Times in 7 Posts

    Volvo C70 T5 project: Volverin :)

    Hi guys, I would like to start thread with project of my C70
    Spec:
    Volvo C70 2.3 T5
    140K on a clock
    99/00 reg
    ME7
    Already have change:
    Engine Oil for Shell Helix Ultra 5W40 fully syn. and K&N Oil filter.
    Bosch Platinium Sparks
    K&N panel Air filter.

    I need to get to STAGE 0 then i would like to go for DYNO run, and anyone of You know where i get go for DYNO around south Birmingham? I have seen someone make remap at HLM bromsgroove? Can any1 tell me some details, how much is cost a dyno with print out?

    After DYNO if everything gonna be ok i will open my pocket for a wider mods like downpipe, cat back, RIP,silicone hoses, single mass flywheel from 850r, remap.
    Last edited by koperbart; Tuesday 26th November 2013 at 11:54.

  2. #2
    Senior Member
    228k and still not broke it!

    Join Date
    Jul 2011
    Location
    Poole, Dorset
    Posts
    23,213
    Thanks
    6,548
    Thanked 7,752 Times in 5,648 Posts
    Liking that grille mate.

    I don't know how much a dyno would be but when you get it mapped there, you get before and after dyno runs. Give them a call mate (google HLM bromsgrove)
    19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...

    310.2bhp / 333ft/lb

    2016 Swedish Day UK "Best Modified Swede"
    SOLD

    Got an old discovery now.

  3. The Following User Says Thank You to M-R-P For This Useful Post:

    koperbart (Tuesday 26th November 2013)

  4. #3
    Senior Member
    VPCUK reigning car of the year
    Nealevo's Avatar
    Join Date
    Apr 2011
    Location
    Home for now.
    Posts
    3,867
    Thanks
    2,157
    Thanked 2,777 Times in 1,607 Posts
    Morning, HLM are a good bunch, i use them all the time and wouldnt take my car anywhere else.... (no i dont work for them) visit the website and all the details are there.

    http://www.hlmtuning.co.uk/tuning.htm

    some good deals to be had and cheap for dyno etc

  5. The Following User Says Thank You to Nealevo For This Useful Post:

    M-R-P (Tuesday 26th November 2013)

  6. #4
    Senior Member
    228k and still not broke it!

    Join Date
    Jul 2011
    Location
    Poole, Dorset
    Posts
    23,213
    Thanks
    6,548
    Thanked 7,752 Times in 5,648 Posts
    Or wait for someone less lazy than myself to post a link
    19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...

    310.2bhp / 333ft/lb

    2016 Swedish Day UK "Best Modified Swede"
    SOLD

    Got an old discovery now.

  7. The Following User Says Thank You to M-R-P For This Useful Post:

    Nealevo (Tuesday 26th November 2013)

  8. #5
    Senior Member
    VPCUK reigning car of the year
    Nealevo's Avatar
    Join Date
    Apr 2011
    Location
    Home for now.
    Posts
    3,867
    Thanks
    2,157
    Thanked 2,777 Times in 1,607 Posts
    im not as quick on the keyboard as you... i have xbox to play...

  9. The Following 2 Users Say Thank You to Nealevo For This Useful Post:

    daza-b (Friday 6th December 2013),M-R-P (Tuesday 26th November 2013)

  10. #6
    Member
    This user has no status
    koperbart's Avatar
    Join Date
    Nov 2013
    Location
    Worcester
    Posts
    57
    Thanks
    15
    Thanked 10 Times in 7 Posts
    Ohh yeah, forgot to say i DON'T like this grill I like black de-badged with wider mesh i think like in xc70 grill. And i would like to have a dyno before any modds, as i want to know i got STAGE 0 in around 240BHP then goin for mods

  11. #7
    Senior Member
    228k and still not broke it!

    Join Date
    Jul 2011
    Location
    Poole, Dorset
    Posts
    23,213
    Thanks
    6,548
    Thanked 7,752 Times in 5,648 Posts
    Shame - I like that grille on there, some chrome projectors would set it off nicely.

    Give HLM a call, I'm sure they'd be able to roll the car for you
    19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...

    310.2bhp / 333ft/lb

    2016 Swedish Day UK "Best Modified Swede"
    SOLD

    Got an old discovery now.

  12. #8
    Driving Miss Daisy
    This user has no status
    V70 Graham's Avatar
    Join Date
    Feb 2012
    Location
    West London
    Posts
    10,942
    Thanks
    2,909
    Thanked 4,171 Times in 2,943 Posts
    Yup, that grill looks good.....dyno on its own should be around £30-£40


    The Relentless Pursuit Of Perfection

  13. The Following User Says Thank You to V70 Graham For This Useful Post:

    koperbart (Tuesday 26th November 2013)

  14. #9
    Member
    This user has no status
    koperbart's Avatar
    Join Date
    Nov 2013
    Location
    Worcester
    Posts
    57
    Thanks
    15
    Thanked 10 Times in 7 Posts
    Thanks guys this that what i want to know. Now till Xmas i will just try to get a STAGE 0 + some vac silicone hoses.
    Maybe one of U Guys remember a diameters of VAC hoses? As is't so cold weather now
    Last edited by koperbart; Tuesday 26th November 2013 at 12:01.

  15. #10
    Driving Miss Daisy
    This user has no status
    V70 Graham's Avatar
    Join Date
    Feb 2012
    Location
    West London
    Posts
    10,942
    Thanks
    2,909
    Thanked 4,171 Times in 2,943 Posts
    Quote Originally Posted by koperbart View Post
    .....maybe one of U Guys remember a diameters of VAC hoses? As is't so cold weather now
    4mm internal iirc


    The Relentless Pursuit Of Perfection

  16. The Following User Says Thank You to V70 Graham For This Useful Post:

    koperbart (Tuesday 26th November 2013)

  17. #11
    Senior Member
    228k and still not broke it!

    Join Date
    Jul 2011
    Location
    Poole, Dorset
    Posts
    23,213
    Thanks
    6,548
    Thanked 7,752 Times in 5,648 Posts
    Yep, 4mm. Worth buying a new TCV too.
    19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...

    310.2bhp / 333ft/lb

    2016 Swedish Day UK "Best Modified Swede"
    SOLD

    Got an old discovery now.

  18. The Following User Says Thank You to M-R-P For This Useful Post:

    koperbart (Tuesday 26th November 2013)

  19. #12
    Member
    This user has no status
    koperbart's Avatar
    Join Date
    Nov 2013
    Location
    Worcester
    Posts
    57
    Thanks
    15
    Thanked 10 Times in 7 Posts
    All of them? and how many meters gonna be enough? 4m?

  20. #13
    Senior Member
    228k and still not broke it!

    Join Date
    Jul 2011
    Location
    Poole, Dorset
    Posts
    23,213
    Thanks
    6,548
    Thanked 7,752 Times in 5,648 Posts
    Go for 5M and have some spare mate
    19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...

    310.2bhp / 333ft/lb

    2016 Swedish Day UK "Best Modified Swede"
    SOLD

    Got an old discovery now.

  21. The Following User Says Thank You to M-R-P For This Useful Post:

    koperbart (Tuesday 26th November 2013)

  22. #14
    Senior Member
    5 pot heart of a Volvo
    T5frankie's Avatar
    Join Date
    Apr 2006
    Location
    On the strip
    Posts
    24,505
    Thanks
    4,423
    Thanked 5,683 Times in 4,419 Posts
    Welcome to the Club

  23. #15
    Shiny Superstar
    Back in the game!
    Wobbly Dave's Avatar
    Join Date
    Aug 2004
    Location
    Stunning Shropshire
    Posts
    17,773
    Thanks
    2,501
    Thanked 3,484 Times in 2,466 Posts
    Same car same colour - I had 320 bhp out of it using a 19T. I am certain Hamish will be thrilled to have another C70 given that he's not seen mine in a while. LOL.
    Volvo ABS ECU Repair
    Join my projecteers tribe - Old Volvos Never Die - They just get faster.

    Visit my VPCUK garage and my YouTube channel - WobblyDave72

  24. The Following User Says Thank You to Wobbly Dave For This Useful Post:

    koperbart (Tuesday 26th November 2013)

  25. #16
    Member
    This user has no status
    koperbart's Avatar
    Join Date
    Nov 2013
    Location
    Worcester
    Posts
    57
    Thanks
    15
    Thanked 10 Times in 7 Posts
    I'm sure of it as i have just 15.8miles to HLM

  26. #17
    Senior Member
    Still more fettling needed,
    will it never end?
    stribo's Avatar
    Join Date
    Jan 2012
    Location
    Tadley
    Posts
    13,326
    Thanks
    2,620
    Thanked 4,587 Times in 3,404 Posts
    Good to see another C70 project.

  27. #18
    Member
    This user has no status
    koperbart's Avatar
    Join Date
    Nov 2013
    Location
    Worcester
    Posts
    57
    Thanks
    15
    Thanked 10 Times in 7 Posts
    Hi Guys, vac hoses and clamps ordered.
    I got a problem with misfire on low rpm about 1-1.5K and sometimes after cold night in the morning when i start engine is works on 3 or 4 cylinders
    Thinking about coils. I found some on ebay BERU ones. Would U go for it:
    http://www.ebay.co.uk/itm/121212426957

  28. #19
    Senior Member
    Still more fettling needed,
    will it never end?
    stribo's Avatar
    Join Date
    Jan 2012
    Location
    Tadley
    Posts
    13,326
    Thanks
    2,620
    Thanked 4,587 Times in 3,404 Posts
    Quote Originally Posted by koperbart View Post
    Hi Guys, vac hoses and clamps ordered.
    I got a problem with misfire on low rpm about 1-1.5K and sometimes after cold night in the morning when i start engine is works on 3 or 4 cylinders
    Thinking about coils. I found some on ebay BERU ones. Would U go for it:
    http://www.ebay.co.uk/itm/121212426957
    That's the same make Parts for Volvos supply, but a lot cheaper.

    http://www.partsforvolvosonline.com/...oducts_id=5159

  29. The Following User Says Thank You to stribo For This Useful Post:

    koperbart (Sunday 1st December 2013)

  30. #20
    Trader
    ???
    merc85's Avatar
    Join Date
    Sep 2010
    Location
    Harwich Essex
    Posts
    7,856
    Thanks
    4,985
    Thanked 2,863 Times in 2,155 Posts
    Quote Originally Posted by koperbart View Post
    Hi Guys, vac hoses and clamps ordered.
    I got a problem with misfire on low rpm about 1-1.5K and sometimes after cold night in the morning when i start engine is works on 3 or 4 cylinders
    Thinking about coils. I found some on ebay BERU ones. Would U go for it:
    http://www.ebay.co.uk/itm/121212426957
    Beru are proper good quality original equipment coil and are on most Volvo's Mercs bm etc.

  31. The Following User Says Thank You to merc85 For This Useful Post:

    koperbart (Sunday 1st December 2013)


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready