Max stable psi anyone has out of 16t, 18t and 19t?

**kyekye09** · Tuesday 12th November 2013, 19:14

Originally Posted by T5REU

So let's get this straight; clearly not many phase 2 guys are running 18 or 19t's but fitting the 19t on shouldn't do the car any harm and my 16t 15psi will feel loads more running the 19t I have?

Would I be best to upgrade the 19t whee to a ARD or ADR bullet wheel? Clipped or or 12x12 or 11x11?https://ardideas.3dcartstores.com/Bi...els_c_134.html
They even do a 20t wheel which will hold over 25 psi
https://ardideas.3dcartstores.com/85...1997_c_13.html
3) would I gain much from fitting the 3 inch decat down pipe from the S60r decat one I have fitted?

stupid question but........
doesn't the T5 come with an 18T....???? I was looking at getting my turbo refurbed and doing a 19T but according to turbo technics it runs an 18T I will try and find the info I was reading

**kyekye09** · Tuesday 12th November 2013, 19:20

link

http://www.turborebuild.co.uk/p/prod...e+49189-08540/

**T5frankie** · Tuesday 12th November 2013, 19:25

Originally Posted by kyekye09

stupid question but........
doesn't the T5 come with an 18T....???? I was looking at getting my turbo refurbed and doing a 19T but according to turbo technics it runs an 18T I will try and find the info I was reading

err no, 16t

**Brett855tdi** · Tuesday 12th November 2013, 19:25

Originally Posted by stribo

Isn't that because Ford had bought them by then?

Personally i think ford ruined volvos... I often borrow my dads 2.4 v50 and hate it

It even smells like a 90s escort

Give me an 850 anyday!

**kyekye09** · Tuesday 12th November 2013, 19:32

Originally Posted by T5frankie

err no, 16t

can you tell im from a Honda back ground.... lol

so is the 18 or 19T an easy swap onto the T5 s60

**p fandango** · Tuesday 12th November 2013, 19:36

Originally Posted by T5REU

They even do a 20t wheel which will hold over 25 psi
https://ardideas.3dcartstores.com/85...1997_c_13.html

i'm currently building a 20t, you will need to either buy the 20t housing or might possibly be able to get the 19t machined out as the wheel is only 1.04mm wider on the inducer side. They also recommend you use the upgraded 11blade exhaust wheel with the 20t to control the boost better

turbo cfm inducer exducer

TD04H-15g 428 42 56
TD04H-16t 435 43.4 56
TD04H-18t 485 45 56
TD04H-19t 500 46 58
TD04H-20t ??? 47.04 58

**T5REU** · Tuesday 12th November 2013, 21:04

Take a look at this from the part owner of ipd us http://www.ardtuning.com/ARD-TD04HL-...20T_p_228.html
400bhp 20t turbo. Just reach the 19t cold wheel. Wow!