Join Today
Results 1 to 9 of 9
  1. #1
    Junior Member
    This user has no status
    kristoff007's Avatar
    Join Date
    Jan 2005
    Location
    Brisbane, Australia
    Posts
    28
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Standard Clutch part number for 1995 850T5R

    Hi guys,

    I had the clutch replaced on my 1995 model T5R about 8,000km ago (4-5 months)

    I'm having some issues with it.

    Since day 1, the clutch felt very very light.
    Since a few weeks ago a high pitched whirring/clicking sound has been happening.
    In the last few days the high pitched whirring/clicking has been joined by an intermittent lower pitched sound.
    The clutch pickup point is now very close to the ground. On a couple of occasions I have been at standstill at a traffic light, in first gear, and with my foot firmly to the floor, it still engages the clutch slightly, (almost stalling the car)
    Coasting along in neutral, the car makes no sound.

    I am taking the car back to where I had the clutch recently replaced.

    I know the clutch was replaced with a Sachs clutch, but am unsure of the part number.

    Can anyone help me with the correct clutch to be installed. I hope the incorrect clutch wasn't installed to begin with, but if it was, the correct part number would be handy.

    I hope this ends well, but i fear a pending dispute

    Thanks for your help,

    Chris
    Sydney Australia.
    Black 850 T5R 1995
    exhaust tip
    K&N panel filter...
    more modifications are on the wish list...

  2. #2
    Randomly Typed Username
    Iraq Lobster
    jamesy12345's Avatar
    Join Date
    May 2013
    Location
    lives on Standard Row
    Posts
    7,389
    Thanks
    4,606
    Thanked 3,343 Times in 2,497 Posts
    There's an old post here mate with some part numbers...

    http://www.vpcuk.org/forums/archive/...p/t-37483.html

    edit:

    more stuff....http://volvospeed.com/vs_forum/topic...r-euro-clutch/
    Last edited by jamesy12345; Thursday 3rd October 2013 at 05:38.

  3. #3
    Junior Member
    This user has no status
    kristoff007's Avatar
    Join Date
    Jan 2005
    Location
    Brisbane, Australia
    Posts
    28
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks very much
    Black 850 T5R 1995
    exhaust tip
    K&N panel filter...
    more modifications are on the wish list...

  4. #4
    Randomly Typed Username
    Iraq Lobster
    jamesy12345's Avatar
    Join Date
    May 2013
    Location
    lives on Standard Row
    Posts
    7,389
    Thanks
    4,606
    Thanked 3,343 Times in 2,497 Posts
    No worries, the info seems to be saying the 850R clutch is a good alternative....? I don't have personal experience of that, just using search. Maybe some of the guys can comment. What box do you have, M56?

  5. #5
    Senior Member
    228k and still not broke it!

    Join Date
    Jul 2011
    Location
    Poole, Dorset
    Posts
    23,213
    Thanks
    6,548
    Thanked 7,752 Times in 5,648 Posts
    Sounds like the clutch wasn't installed correctly to me.
    19t, greens, 3" inlet, 3" downpipe with race cat, V70R catback, autotech map...

    310.2bhp / 333ft/lb

    2016 Swedish Day UK "Best Modified Swede"
    SOLD

    Got an old discovery now.

  6. #6
    Trader
    Ready for the weekend
    partsforvolvos.com's Avatar
    Join Date
    Jun 2012
    Location
    Rainy Wellingborough
    Posts
    1,684
    Thanks
    270
    Thanked 613 Times in 451 Posts
    i suspect either it needs re bleeding, or was not pre tensioned before installing. if this is not done, the little arms get bent as the box is bolted up.
    the clutches are the same dimensions, but the r clutch does have higher rated springs so i good for more power. that's why it is a fairly standard upgrade choice.

  7. #7
    Junior Member
    love my R's
    855t5's Avatar
    Join Date
    Dec 2012
    Posts
    27
    Thanks
    6
    Thanked 2 Times in 2 Posts
    Sounds like the centre plate is wrong way round to me?

  8. #8
    Senior Member
    OH DEAR
    t5 pete's Avatar
    Join Date
    Jul 2008
    Location
    barnsley s.yorkshire
    Posts
    12,470
    Thanks
    2,138
    Thanked 3,711 Times in 2,752 Posts
    Quote Originally Posted by partsforvolvos.com View Post
    i suspect either it needs re bleeding, or was not pre tensioned before installing. if this is not done, the little arms get bent as the box is bolted up. the clutches are the same dimensions, but the r clutch does have higher rated springs so i good for more power. that's why it is a fairly standard upgrade choice.
    You know this is a 850 don't you

  9. #9
    Senior Member
    This user has no status

    Join Date
    Feb 2012
    Posts
    890
    Thanks
    135
    Thanked 356 Times in 276 Posts
    The latest Volvo part number for all 850 manual variants and the V70 T5 including the 2.5 = 271494 This is for the Clutch KIT

    1998 on is more complicated
    Last edited by 960kg; Thursday 3rd October 2013 at 18:36.


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
ipv6 ready