Can anyone please tell me what size the front wheel hub bearing nut is for a V70 97 auto
Thanks
Rob
Can anyone please tell me what size the front wheel hub bearing nut is for a V70 97 auto
Thanks
Rob
Socket size? Its 36mm
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
RGM200 (Thursday 5th September 2013)
You need at least a meter long breaker bar and loads of strength to do those up. - its stupid tight!
its 120nm + 60 degrees and that = FT
RGM200 (Thursday 5th September 2013)
1996 Olive Green 850 AWD - Follow the Project - Forged rods, 19T, big blue injectors, 960 TB, 3.25" MAF, Ostrich, 608 binary, arduino data display, active exhaust control with Focus RS tips, 320mm front brake conversion.
1996 Nautic Blue 850 AWD - Failed its MOT, now it's a donor for the green thing.
2004 Sapphire Black S60 D5 - The new daily hack.
RGM200 (Thursday 5th September 2013)
RGM200 (Thursday 5th September 2013)
i snapped my breaker bar trying to undo it to even start the job, so had to steal my dad's 3/4 inch kit- he does coaches .
RGM200 (Thursday 5th September 2013)
Thanks everyone, I bought a 36mm socket, used my breaker bar and a 3ft cut off scaffold bar and with all 18 stone of me standing on the bar the nut finally came undone - i suppose being done up for 15 years and spinning for 138k miles it would be a bit shy to come undone!!
Thanks for the advice everyone
Rob
Dangerous Dave (Thursday 5th September 2013)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks