My car currently has a 15 g fitted.
If I was to fit a 16t. Would I have to change the injectors.
My car currently has a 15 g fitted.
If I was to fit a 16t. Would I have to change the injectors.
I don't break gearboxes. Just engine mounts.............
And also. Would a 16t run off a standard map or rica map.
Or would it have to be custom mapping.
I don't break gearboxes. Just engine mounts.............
However, fitting whites and a remap with it will make it better
Current Chariots...
Micra K11 'project sh*tbox'
V70 D5 daily
1991 Transit Recovery
When you say whites and a remap. Do u mean custom map. Or just a off the shelf map
I don't break gearboxes. Just engine mounts.............
I have a HLM off the shelf map and i have just fitted blue injectors to help it along, im sure it doesnt need them as it ran fine but every little helps for future mods...
Off the shelf Rica on mine, had whites as standard but currently looking out for blues, as I suspect they are messing about a bit.
As a rule of thumb, I'm running whites, 16T, 304 Rica and 1.3 bar and I beat my mates Audi S4 V8
Current Chariots...
Micra K11 'project sh*tbox'
V70 D5 daily
1991 Transit Recovery
Factory White 855R : 2.5 Bottom End : Ported & Flowed Cylinder Head : TD04 19T TurboVXR Injectors : ME7 Manifold : TWR Throttle Body : Blackbeast IC : AEM Progressive WI : Ferrita 3" DownpipeMilltek Cat-Back : BC BR Coilovers : IPD ARB : AP Racing Brakes : M56 & Gripper LSD
cherry1809 (Friday 29th March 2013)
PIC][/SIGPIC]
aaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa
Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread
Got an 18T in mine boosting low at the mo, We're just about to put in some VXR injectors and remap it with a Motronix 4.4 turbo on 3.8 bar.
Let's see how long it lasts.
Forgotten what the thing looks like! Tuning taking a little longer than expected. Gonna be a belter when it's back though.
That will be about the same as Nealevo, so should be good for 325bhp
PIC][/SIGPIC]
aaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaa
Facebook^^^^^^^^^^^^^^^^ Old T-5 Kompressor Thread^^^^^^^^^^^^^^^ New TT-10 Kompressor Thread
Theador (Sunday 26th April 2015)
Can't wait! Putting a 3" MAF and 3" intake pipe in to get a bit more air flowing too.
Forgotten what the thing looks like! Tuning taking a little longer than expected. Gonna be a belter when it's back though.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks